350-401 Latest Test Dumps Questions & 350-401 Test Review & Latest 350-401 Test Pass4Sure - Omgzlook

Omgzlook will help you to find what you need in the exam and our dumps must help you to obtain 350-401 Latest Test Dumps Questions certificate. Are you satisfied with your present job? Are you satisfied with what you are doing? Do you want to improve yourself? To master some useful skills is helpful to you. Now that you choose to work in the IT industry, you must register IT certification test and get the IT certificate which will help you to upgrade yourself. As we all know, the preparation process for an exam is very laborious and time- consuming. We had to spare time to do other things to prepare for 350-401 Latest Test Dumps Questions exam, which delayed a lot of important things. If you successfully get Cisco 350-401 Latest Test Dumps Questions certificate, you can finish your work better.

To help you pass the 350-401 Latest Test Dumps Questions exam is our goal.

CCNP Enterprise 350-401 Latest Test Dumps Questions - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Omgzlook can not only save you valuable time, but also make you feel at ease to participate in the exam and pass it successfully. Our products are just suitable for you. Our 350-401 Reliable Exam Book exam training dumps will help you master the real test and prepare well for your exam.

The training materials of Omgzlook are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. Once you select our Omgzlook, we can not only help you pass Cisco certification 350-401 Latest Test Dumps Questions exam and consolidate their IT expertise, but also have a one-year free after-sale Update Service. Omgzlook is a website to provide a targeted training for Cisco certification 350-401 Latest Test Dumps Questions exam.

Our Cisco 350-401 Latest Test Dumps Questions latest study guide can help you.

Omgzlook is an excellent source of information on IT Certifications. In the Omgzlook, you can find study skills and learning materials for your exam. Omgzlook's Cisco 350-401 Latest Test Dumps Questions training materials are studied by the experienced IT experts. It has a strong accuracy and logic. To encounter Omgzlook, you will encounter the best training materials. You can rest assured that using our Cisco 350-401 Latest Test Dumps Questions exam training materials. With it, you have done fully prepared to meet this exam.

Most returned customers said that our 350-401 Latest Test Dumps Questions dumps pdf covers the big part of main content of the certification exam. Questions and answers from our 350-401 Latest Test Dumps Questions free download files are tested by our certified professionals and the accuracy of our questions are 100% guaranteed.

350-401 PDF DEMO:

QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

If you are tired of preparing Cisco Microsoft MS-102 exam, you can choose Omgzlook Cisco Microsoft MS-102 certification training materials. We strive for perfection all these years and get satisfactory results with concerted cooperation between experts, and all questions points in our IIA IIA-CIA-Part3-3P-KR real exam are devised and written base on the real exam. Omgzlook Cisco SAP C-S4CPB-2408 exam dumps are the best reference materials. Although you will take each Microsoft MB-335 online test one at a time - each one builds upon the previous. Omgzlook won a good reputation by these candidates that have passed Cisco IBM C1000-137 certification exam.

Updated: May 28, 2022