However, we believe that with the excellent quality and good reputation of our study materials, we will be able to let users select us in many products. Our study materials allow users to use the 350-401 Pass Exam certification guide for free to help users better understand our products better. Even if you find that part of it is not for you, you can still choose other types of learning materials in our study materials. In addition, it is very easy and convenient to make notes during the study for 350-401 Pass Exam real test, which can facilitate your reviewing. When you choose Omgzlook practice test engine, you will be surprised by its interactive and intelligence features. After we develop a new version, we will promptly notify you.
CCNP Enterprise 350-401 Stop hesitating.
Accompanying with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Pass Exam exam dumps, we educate our candidates with less complicated Q&A but more essential information, which in a way makes you acquire more knowledge and enhance your self-cultivation. It will help you to accelerate your knowledge and improve your professional ability by using our 350-401 Valid Test Forum vce dumps. We are so proud of helping our candidates go through 350-401 Valid Test Forum real exam in their first attempt quickly.
We did not gain our high appraisal by our 350-401 Pass Exam exam practice for nothing and there is no question that our 350-401 Pass Exam practice materials will be your perfect choice. First, you can see the high hit rate on the website that can straightly proved our 350-401 Pass Exam study braindumps are famous all over the world. Secondly, you can free download the demos to check the quality, and you will be surprised to find we have a high pass rate as 98% to 100%.
Cisco 350-401 Pass Exam - And then, you can learn anytime, anywhere.
The Omgzlook product here is better, cheaper, higher quality and unlimited for all time; kiss the days of purchasing multiple Cisco braindumps repeatedly, or renewing 350-401 Pass Exam training courses because you ran out of time. Now you can learn 350-401 Pass Exam skills and theory at your own pace and anywhere you want with top of the 350-401 Pass Exam braindumps, you will find it's just like a pice a cake to pass 350-401 Pass Examexam.
350-401 Pass Exam practice materials stand the test of time and harsh market, convey their sense of proficiency with passing rate up to 98 to 100 percent. They are 100 percent guaranteed 350-401 Pass Exam learning quiz.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Contrary to most of the HP HP2-I63 exam preparatory material available online, Omgzlook’s dumps can be obtained on an affordable price yet their quality and benefits beat all similar products of our competitors. Those updates of our Cisco 820-605 exam questions will be sent to you accordingly for one year freely. SAP C_THR81_2311 - The Questions & answers are verified and selected by professionals in the field and ensure accuracy and efficiency throughout the whole Product. Our Cisco 300-445 real exam helps you not only to avoid all the troubles of learning but also to provide you with higher learning quality than other students'. We can provide absolutely high quality guarantee for our Huawei H20-421_V1.0 practice materials, for all of our Huawei H20-421_V1.0 learning materials are finalized after being approved by industry experts.
Updated: May 28, 2022