If you persist in the decision of choosing our 350-401 Latest Demo test braindumps, your chance of success will increase dramatically. Only the help from the most eligible team can be useful and that are three reasons that our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prepare torrent outreach others. Esoteric content will look so easily under the explanation of our experts. You can learn some authentic knowledge with our high accuracy and efficiency 350-401 Latest Demo simulating questions and help you get authentic knowledge of the exam. Dear customers, you may think it is out of your league before such as winning the 350-401 Latest Demo exam practice is possible within a week or a 350-401 Latest Demo practice material could have passing rate over 98 percent. At the same time, if you have problems with downloading and installing, Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) torrent prep also has dedicated staff that can provide you with remote online guidance.
It all starts from our 350-401 Latest Demo learning questions.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Demo study materials can satisfy their wishes and they only spare little time to prepare for exam. When you see other people in different industry who feel relaxed with high salary, do you want to try another field? And is the difficulty of learning a new piece of knowledge often deterring you? It doesn't matter, now Latest 350-401 Practice Questions Book practice exam offers you a great opportunity to enter a new industry. Our Latest 350-401 Practice Questions Book learning material was compiled from the wisdom and sweat of many industry experts.
Are you staying up for the 350-401 Latest Demo exam day and night? Do you have no free time to contact with your friends and families because of preparing for the exam? Are you tired of preparing for different kinds of exams? If your answer is yes, please buy our 350-401 Latest Demo exam questions, which is equipped with a high quality. We can make sure that our 350-401 Latest Demo study materials have the ability to help you solve your problem, and you will not be troubled by these questions above.
Cisco 350-401 Latest Demo - They are quite convenient.
With the rapid development of the world economy, it has been universally accepted that a growing number of people have longed to become the social elite. However, the competition of becoming the social elite is fierce for all people. The 350-401 Latest Demo latest dumps will be a shortcut for a lot of people who desire to be the social elite. If you try your best to prepare for the 350-401 Latest Demo exam and get the related certification in a short time, it will be easier for you to receive the attention from many leaders of the big company, and it also will be very easy for many people to get a decent job in the labor market by the 350-401 Latest Demo learning guide.
Our 350-401 Latest Demo quiz torrent can help you get out of trouble regain confidence and embrace a better life. Our 350-401 Latest Demo exam question can help you learn effectively and ultimately obtain the authority certification of Cisco, which will fully prove your ability and let you stand out in the labor market.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
Pegasystems PEGACPSSA23V1 - In order to meet the demands of all people, our company has designed the trail version for all customers. In this case, we need a professional Salesforce B2C-Commerce-Developer certification, which will help us stand out of the crowd and knock out the door of great company. We can make sure that you cannot find the more suitable OMG OMG-OCUP2-FOUND100certification guide than our study materials, so hurry to choose the study materials from our company as your study tool, it will be very useful for you to prepare for the OMG OMG-OCUP2-FOUND100 exam. Microsoft MB-240 - You can see the high pass rate as 98% to 100%, which is unmarched in the market. In order to let all people have the opportunity to try our products, the experts from our company designed the trial version of our Salesforce Salesforce-AI-Associate prep guide for all people.
Updated: May 28, 2022