If you would like to sail through the test, come on and try it. To pass Cisco 350-401 Free Vce Dumps certification exam seems to be a very difficult task. Having registered 350-401 Free Vce Dumps test, are you worrying about how to prepare for the exam? If so, please see the following content, I now tell you a shortcut through the 350-401 Free Vce Dumps exam. Our 350-401 Free Vce Dumps study materials concentrate the essence of exam materials and seize the focus information to let the learners master the key points. And our 350-401 Free Vce Dumps learning materials provide multiple functions and considerate services to help the learners have no inconveniences to use our product. If you want to get security that you can pass Cisco 350-401 Free Vce Dumps certification exam at the first attempt, Omgzlook Cisco 350-401 Free Vce Dumps exam dumps is your unique and best choice.
CCNP Enterprise 350-401 We will provide you with thoughtful service.
Before you try to attend the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Vce Dumps practice exam, you need to look for best learning materials to easily understand the key points of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free Vce Dumps exam prep. Our Test 350-401 Vce Free learning materials are new but increasingly popular choices these days which incorporate the newest information and the most professional knowledge of the practice exam. All points of questions required are compiled into our Test 350-401 Vce Free preparation quiz by experts.
Our 350-401 Free Vce Dumps exam dumps are required because people want to get succeed in IT field by clearing the certification exam. Passing 350-401 Free Vce Dumps practice exam is not so easy and need to spend much time to prepare the training materials, that's the reason that so many people need professional advice for 350-401 Free Vce Dumps exam prep. The 350-401 Free Vce Dumps dumps pdf are the best guide for them passing test.
Cisco 350-401 Free Vce Dumps - It is so cool even to think about it.
In this highly competitive modern society, everyone needs to improve their knowledge level or ability through various methods so as to obtain a higher social status. Under this circumstance passing 350-401 Free Vce Dumps exam becomes a necessary way to improve oneself. And you are lucky to find us for we are the most popular vendor in this career and have a strong strength on providing the best 350-401 Free Vce Dumps study materials. And the price of our 350-401 Free Vce Dumps practice engine is quite reasonable.
The best part of 350-401 Free Vce Dumps exam dumps are their relevance, comprehensiveness and precision. You need not to try any other source for350-401 Free Vce Dumps exam preparation.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Oracle 1z0-071 - So for us, with one more certification, we will have one more bargaining chip in the future. You will be much awarded with our Amazon SAA-C03 learning engine. You final purpose is to get the ACAMS CAMS-KR certificate. Our high-quality ARDMS SPI} learning guide help the students know how to choose suitable for their own learning method, our ARDMS SPI study materials are a very good option. As is known to us, there are best sale and after-sale service of the Fortinet FCSS_NST_SE-7.4 certification training dumps all over the world in our company.
Updated: May 28, 2022