When we started offering Cisco 350-401 Vce Free exam questions and answers and exam simulator, we did not think that we will get such a big reputation. What we are doing now is incredible form of a guarantee. Omgzlook guarantee passing rate of 100%, you use your Cisco 350-401 Vce Free exam to try our Cisco 350-401 Vce Free training products, this is correct, we can guarantee your success. The 350-401 Vce Free practice dumps can allow users to use the time of debris anytime and anywhere to study and make more reasonable arrangements for their study and life. Choosing our 350-401 Vce Free simulating materials is a good choice for you, and follow our step, just believe in yourself, you can do it perfectly! This is unprecedented true and accurate test materials.
CCNP Enterprise 350-401 Then you can learn and practice it.
CCNP Enterprise 350-401 Vce Free - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) With Omgzlook real questions and answers, when you take the exam, you can handle it with ease and get high marks. If you don’t have enough ability, it is very possible for you to be washed out. On the contrary, the combination of experience and the Download 350-401 Fee certification could help you resume stand out in a competitive job market.
Do you wonder why so many peers can successfully pass 350-401 Vce Free exam? Are also you eager to obtain 350-401 Vce Free exam certification? Now I tell you that the key that they successfully pass the exam is owing to using our 350-401 Vce Free exam software provided by our Omgzlook. Our 350-401 Vce Free exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our 350-401 Vce Free exam software, you can improve your study ability to obtain 350-401 Vce Free exam certification.
Cisco 350-401 Vce Free - It doesn’t matter.
If you choose our 350-401 Vce Free exam review questions, you can share fast download. As we sell electronic files, there is no need to ship. After payment you can receive 350-401 Vce Free exam review questions you purchase soon so that you can study before. If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our Cisco 350-401 Vce Free exam review questions and you will clear exams. If you master all key knowledge points, you get a wonderful score.
There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend. More and more workers have to spend a lot of time on meeting the challenge of gaining the 350-401 Vce Free certification by sitting for an exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Microsoft AZ-104 - Please totally trust the accuracy of questions and answers. We have taken our customers’ suggestions of the WGU Cybersecurity-Architecture-and-Engineering exam prep seriously, and according to these useful suggestions, we have tried our best to perfect the WGU Cybersecurity-Architecture-and-Engineering reference guide from our company just in order to meet the need of these customers well. Preparing for the Network Appliance NS0-528 real exam is easier if you can select the right test questions and be sure of the answers. Usually, the questions of the real exam are almost the same with our SAP C-TS422-2023 exam questions. Online test engine enjoys great reputation among IT workers because it brings you to the atmosphere of VMware 2V0-31.24 real exam and remarks your mistakes.
Updated: May 28, 2022