So our customers can pass the exam with ease. There are more opportunities for possessing with a certification, and our 350-401 Test study tool is the greatest resource to get a leg up on your competition, and stage yourself for promotion. When it comes to our time-tested 350-401 Test latest practice dumps, for one thing, we have a professional team contains a lot of experts who have devoted themselves to the research and development of our 350-401 Test exam guide, thus we feel confident enough under the intensely competitive market. Our APP online version of 350-401 Test exam questions has the advantage of supporting all electronic equipment. You just need to download the online version of our 350-401 Test preparation dumps, and you can use our 350-401 Test study quiz by any electronic equipment. Our PDF version can be printed and you can take notes as you like.
CCNP Enterprise 350-401 So our product is a good choice for you.
During your practice process, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test test questions would be absorbed, which is time-saving and high-efficient. Under the help of our 350-401 Online Test exam questions, the pass rate among our customers has reached as high as 98% to 100%. We are look forward to become your learning partner in the near future.
In this high-speed world, a waste of time is equal to a waste of money. As an electronic product, our 350-401 Test real study dumps have the distinct advantage of fast delivery. Once our customers pay successfully, we will check about your email address and other information to avoid any error, and send you the 350-401 Test prep guide in 5-10 minutes, so you can get our 350-401 Test exam questions at first time.
Cisco 350-401 Test - Knowledge is wealth.
Our PDF version of 350-401 Test training materials is legible to read and remember, and support printing request. Software version of 350-401 Test practice materials supports simulation test system, and give times of setup has no restriction. Remember this version support Windows system users only. App online version of 350-401 Test exam questions is suitable to all kinds of equipment or digital devices and supportive to offline exercise on the condition that you practice it without mobile data.
Whenever it is possible, you can begin your study as long as there has a computer. In addition, all installed 350-401 Test study tool can be used normally.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Get the test EMC D-MSS-DS-23 certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so EMC D-MSS-DS-23 exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. Please believe that APMG-International AgilePM-Practitioner learning materials will be your strongest backing from the time you buy our APMG-International AgilePM-Practitioner practice braindumps to the day you pass the exam. Our HP HP2-I63 practice materials are updating according to the precise of the real exam. With the help of our SAP C-S43-2022 exam questions, your review process will no longer be full of pressure and anxiety. When you send us a message, we will reply immediately and we will never waste your precious time on studying our Amazon SOA-C02 practice quiz.
Updated: May 28, 2022