How to improve your IT ability and increase professional IT knowledge of 350-401 Simulator Online real exam in a short time? Obtaining valid training materials will accelerate the way of passing 350-401 Simulator Online actual test in your first attempt. It will just need to take one or two days to practice Cisco 350-401 Simulator Online test questions and remember answers. You will free access to our test engine for review after payment. In the course of your study, the test engine of 350-401 Simulator Online actual exam will be convenient to strengthen the weaknesses in the learning process. This can be used as an alternative to the process of sorting out the wrong questions of 350-401 Simulator Online learning guide in peacetime learning, which not only help you save time, but also makes you more focused in the follow-up learning process with our 350-401 Simulator Online learning materials. Each question in 350-401 Simulator Online pass guide is certified by our senior IT experts to improve candidates' ability and skills.
So the 350-401 Simulator Online exam is a great beginning.
As a consequence you are able to keep pace with the changeable world and remain your advantages with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Simulator Online training braindumps. We would like to provide our customers with different kinds of 350-401 Reliable Test Questions Pdf practice guide to learn, and help them accumulate knowledge and enhance their ability. Besides, we guarantee that the 350-401 Reliable Test Questions Pdf exam questions of all our users can be answered by professional personal in the shortest time with our 350-401 Reliable Test Questions Pdf study dumps.
You can customize the practice environment to suit your learning objectives. 350-401 Simulator Online dumps at Omgzlook are always kept up to date. Every addition or subtraction of 350-401 Simulator Online exam questions in the exam syllabus is updated in our braindumps instantly.
It all starts from our Cisco 350-401 Simulator Online learning questions.
Only 20-30 hours on our 350-401 Simulator Online learning guide are needed for the client to prepare for the test and it saves our client’s time and energy. Most people may wish to use the shortest time to prepare for the test and then pass the test with our 350-401 Simulator Online study materials successfully because they have to spend their most time and energy on their jobs, learning, family lives and other important things. Our 350-401 Simulator Online study materials can satisfy their wishes and they only spare little time to prepare for exam.
When you see other people in different industry who feel relaxed with high salary, do you want to try another field? And is the difficulty of learning a new piece of knowledge often deterring you? It doesn't matter, now 350-401 Simulator Online practice exam offers you a great opportunity to enter a new industry. Our 350-401 Simulator Online learning material was compiled from the wisdom and sweat of many industry experts.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
We can make sure that our CIW 1D0-623 study materials have the ability to help you solve your problem, and you will not be troubled by these questions above. You can free download the demos which present a small part of the Salesforce Energy-and-Utilities-Cloud learning engine, and have a look at the good quality of it. We can promise that if you buy our products, it will be very easy for you to pass your Microsoft DP-900-KR exam and get the certification. If you compare the test to a battle, the examinee is like a brave warrior, and the good APMG-International AgilePM-Foundation learning materials are the weapon equipments, but if you want to win, then it is essential for to have the good APMG-International AgilePM-Foundation study guide. With a total new perspective, SAP E_ACTAI_2403 study materials have been designed to serve most of the office workers who aim at getting an exam certification.
Updated: May 28, 2022