You will become a master of learning in the eyes of others. With 350-401 New Study Materials study braindumps, successfully passing the exam will no longer be a dream. 350-401 New Study Materials test guide is an examination material written by many industry experts based on the examination outlines of the calendar year and industry development trends. Although there are many ways to help you achieve your purpose, selecting Omgzlook is your wisest choice. Having Omgzlook can make you spend shorter time less money and with greater confidence to pass the exam, and we also provide you with a free one-year after-sales service. Various study forms are good for boosting learning interests.
CCNP Enterprise 350-401 We are keeping advancing with you.
Omgzlook can help you 100% pass Cisco certification 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Study Materials exam, and if you carelessly fail to pass Cisco certification 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Study Materials exam, we will guarantee a full refund for you. It is well known that even the best people fail sometimes, not to mention the ordinary people. In face of the 350-401 Valid Test Notes exam, everyone stands on the same starting line, and those who are not excellent enough must do more.
Omgzlook is a website which can help you quickly pass Cisco certification 350-401 New Study Materials exams. In order to pass Cisco certification 350-401 New Study Materials exam, many people who attend Cisco certification 350-401 New Study Materials exam have spent a lot of time and effort, or spend a lot of money to participate in the cram school. Omgzlook is able to let you need to spend less time, money and effort to prepare for Cisco certification 350-401 New Study Materials exam, which will offer you a targeted training.
Cisco Cisco 350-401 New Study Materials exam is a Technical Specialist exam.
We all well know the status of Cisco certification 350-401 New Study Materials exams in the IT area is a pivotal position, but the key question is to be able to get Cisco 350-401 New Study Materials certification is not very simple. We know very clearly about the lack of high-quality and high accuracy exam materials online. Exam practice questions and answers Omgzlook provide for all people to participate in the IT industry certification exam supply all the necessary information. Besides, it can all the time provide what you want. Buying all our information can guarantee you to pass your first Cisco certification 350-401 New Study Materials exam.
Many people find Cisco 350-401 New Study Materials exam training materials in the network. But they do not know which to believe.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Omgzlook can not only provide all the information related to the Cisco certification SAP C-TS4FI-2023 exam for the candidates, but also provide a good learning opportunity for them. Linux Foundation FOCP - Do not you want to break you own? Double your salary, which is not impossible. Omgzlook's Cisco APMG-International AgilePM-Foundation exam practice questions have a lot of similarities with the real exam practice questions. WGU Organizational-Behaviors-and-Leadership - Cisco certification has been well recognized by international community. Our training program can effectively help you have a good preparation for Cisco certification Microsoft SC-200 exam.
Updated: May 28, 2022