Our 350-401 Preparation Materials real exam helps you not only to avoid all the troubles of learning but also to provide you with higher learning quality than other students'. At the same time, our 350-401 Preparation Materials exam materials have been kind enough to prepare the App version for you, so that you can download our 350-401 Preparation Materials practice prep to any electronic device, and then you can take all the learning materials with you and review no matter where you are. As long as you choose our 350-401 Preparation Materials exam questions, you will get the most awarded. We can provide absolutely high quality guarantee for our 350-401 Preparation Materials practice materials, for all of our 350-401 Preparation Materials learning materials are finalized after being approved by industry experts. We look forward to meeting you.
CCNP Enterprise 350-401 This is really amazing.
CCNP Enterprise 350-401 Preparation Materials - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) And we will let you down. Omgzlook's Cisco 350-401 Latest Exam Online exam training materials are effective training materials that proven by professionals and the candidates who passed the exam. It can help you to pass the exam certification easily.
To understand our 350-401 Preparation Materials learning questions in detail, just come and try! Our 350-401 Preparation Materials real quiz boosts 3 versions: the PDF, the Softwate and the APP online which will satisfy our customers by their varied functions to make you learn comprehensively and efficiently. The learning of our 350-401 Preparation Materials study materials costs you little time and energy and we update them frequently.
Cisco 350-401 Preparation Materials - In order to enhance your own, do it quickly.
Many people want to be the competent people which can excel in the job in some area and be skillful in applying the knowledge to the practical working in some industry. But the thing is not so easy for them they need many efforts to achieve their goals. Passing the test 350-401 Preparation Materials certification can make them become that kind of people and if you are one of them buying our 350-401 Preparation Materials study materials will help you pass the 350-401 Preparation Materials test smoothly with few efforts needed.
Don't you believe in it? Omgzlook real questions and answers are the materials that it can help you get high marks and pass the certification exam. Please try it.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Saving the precious time users already so, also makes the Huawei H13-611_V5.0 quiz torrent look more rich, powerful strengthened the practicability of the products, to meet the needs of more users, to make the Huawei H13-611_V5.0 test prep stand out in many similar products. Omgzlook Cisco Databricks Databricks-Certified-Data-Engineer-Associate dumps are validated by many more candidates, which can guarantee a high success rate. Passing the Splunk SPLK-5002 and obtaining the certificate may be the fastest and most direct way to change your position and achieve your goal. Besides, to make you be rest assured of our dumps, we provide APMG-International AgilePM-Foundation exam demo for you to free download. SAP C-C4H320-34 - You can totally relay on us.
Updated: May 28, 2022