If you fail in the exam with our 350-401 Exam Forum quiz prep we will refund you in full at one time immediately. If only you provide the proof which include the exam proof and the scanning copy or the screenshot of the failure marks we will refund you immediately. If any problems or doubts about our 350-401 Exam Forum exam torrent exist, please contact our customer service personnel online or contact us by mails and we will reply you and solve your doubts immediately. Easily being got across by exam whichever level you are, our 350-401 Exam Forum simulating questions have won worldwide praise and acceptance as a result. They are 100 percent guaranteed practice materials. Our customer service staff will be delighted to answer your questions on the 350-401 Exam Forum learing engine.
CCNP Enterprise 350-401 Also, the system will deduct the relevant money.
CCNP Enterprise 350-401 Exam Forum - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) But if it is too complex, not only can’t we get good results, but also the burden of students' learning process will increase largely. Now, we have launched some popular Reliable 350-401 Test Tutorial training prep to meet your demands. And you will find the quality of the Reliable 350-401 Test Tutorial learning quiz is the first-class and it is very convenient to download it.
In summary, choose our exam materials will be the best method to defeat the exam. Maybe you are still having trouble with the Cisco 350-401 Exam Forum exam; maybe you still don’t know how to choose the 350-401 Exam Forum exam materials; maybe you are still hesitant. But now, your search is ended as you have got to the right place where you can catch the finest 350-401 Exam Forum exam materials.
Cisco 350-401 Exam Forum - Please pay more attention to our website.
Considering many exam candidates are in a state of anguished mood to prepare for the 350-401 Exam Forum exam, our company made three versions of 350-401 Exam Forum real exam materials to offer help. All these variants due to our customer-oriented tenets. As a responsible company over ten years, we are trustworthy. In the competitive economy, this company cannot remain in the business for long. But we keep being the leading position in contrast. We are reactive to your concerns and also proactive to new trends happened in this 350-401 Exam Forum exam.
Because the training materials it provides to the IT industry have no-limited applicability. This is the achievement made by IT experts in Omgzlook after a long period of time.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Microsoft MB-240 - If you feel exam is a headache, don't worry. If you are still study hard to prepare the Cisco Microsoft DP-203-KR exam, you're wrong. Even if you have no basic knowledge about the relevant knowledge, you still can pass the WGU Integrated-Physical-Sciences exam. If you are concerned about the test, however, you can choose Omgzlook's Cisco EMC D-PSC-MN-01 exam training materials. With the help of ARDMS SPI guide questions, you can conduct targeted review on the topics which to be tested before the exam, and then you no longer have to worry about the problems that you may encounter a question that you are not familiar with during the exam.
Updated: May 28, 2022