If you are tired of preparing Cisco 350-401 Reliable Exam Cram exam, you can choose Omgzlook Cisco 350-401 Reliable Exam Cram certification training materials. Because of its high efficiency, you can achieve remarkable results. Omgzlook helped many people taking IT certification exam who thought well of our exam dumps. The efficiency and accuracy of our 350-401 Reliable Exam Cram learning guide will not let you down. The disparity between our 350-401 Reliable Exam Cram practice materials and others are distinct. Omgzlook Cisco 350-401 Reliable Exam Cram exam dumps are the best reference materials.
We have the complete list of popular 350-401 Reliable Exam Cram exams.
Actually, 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Cram exam really make you anxious. In such a way, you will get a leisure study experience as well as a doomed success on your coming Test 350-401 Cram Pdf exam. After our unremitting efforts, Test 350-401 Cram Pdf learning guide comes in everybody's expectation.
Every version of 350-401 Reliable Exam Cram study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere; the online version can use on any electronic equipment there is network available; the software version can simulate the real 350-401 Reliable Exam Cram exam environment to let you have more real feeling to 350-401 Reliable Exam Cram real exam, besides the software version can be available installed on unlimited number devices.
Cisco 350-401 Reliable Exam Cram - This version is software.
We guarantee that after purchasing our 350-401 Reliable Exam Cram exam torrent, we will deliver the product to you as soon as possible within ten minutes. So you don’t need to wait for a long time and worry about the delivery time or any delay. We will transfer our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prep torrent to you online immediately, and this service is also the reason why our 350-401 Reliable Exam Cram test braindumps can win people’s heart and mind. Therefore, you are able to get hang of the essential points in a shorter time compared to those who are not willing to use our 350-401 Reliable Exam Cram exam torrent.
With the help of our 350-401 Reliable Exam Cram dumps collection, all level of candidates can grasp the key content of the real exam and solve the difficulty of 350-401 Reliable Exam Cram real questions easily. The most important is that our test engine enables you practice 350-401 Reliable Exam Cram exam pdf on the exact pattern of the actual exam.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Passing a IIBA ECBA exam to get a certificate will help you to look for a better job and get a higher salary. When you are preparing EC-COUNCIL 212-89 practice exam, it is necessary to grasp the overall knowledge points of real exam by using the latest EC-COUNCIL 212-89 pass guide. You will love our HP HPE0-V28-KR exam questions as long as you have a try! We often regard learning for Cisco 300-710 exam as a torture. IBM C1000-182 - And they are the masterpieces of processional expertise these area with reasonable prices.
Updated: May 28, 2022