We are considered the best ally to our customers who want to pass their 350-401 Dumps Ebook exam by their first attempt and achieve the certification successfully! It is a prevailing belief for many people that practice separated from theories are blindfold. Our 350-401 Dumps Ebook learning quiz is a salutary guidance helping you achieve success. If you don't believe it, you can try our product demo first; after you download and check our 350-401 Dumps Ebook free demo, you will find how careful and professional our Research and Development teams are. If you are still preparing for other IT certification exams except 350-401 Dumps Ebook exam, you can also find the related exam dumps you want in our huge dumps and study materials. And the warm feedbacks from our customers all over the world prove that we are considered the most popular vendor in this career.
CCNP Enterprise 350-401 Many customers may be doubtful about our price.
Even if you have a week foundation, I believe that you will get the certification by using our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Ebook study materials. Our Valid 350-401 Study Materials exam questions are compiled by experts and approved by authorized personnel and boost varied function so that you can learn Valid 350-401 Study Materials test torrent conveniently and efficiently. We provide free download and tryout before your purchase and if you fail in the exam we will refund you in full immediately at one time.
You are the best and unique in the world. Just be confident to face new challenge! As the old saying tells that, he who doesn't go advance will lose his ground.
Cisco 350-401 Dumps Ebook - In modern society, we are busy every day.
At the fork in the road, we always face many choices. When we choose job, job are also choosing us. Today's era is a time of fierce competition. Our 350-401 Dumps Ebook exam question can make you stand out in the competition. Why is that? The answer is that you get the certificate. What certificate? Certificates are certifying that you have passed various qualifying examinations. Watch carefully you will find that more and more people are willing to invest time and energy on the 350-401 Dumps Ebook exam, because the exam is not achieved overnight, so many people are trying to find a suitable way.
What is more, there are extra place for you to make notes below every question of the 350-401 Dumps Ebook practice quiz. Don't you think it is quite amazing? Just come and have a try!
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Secondly, the price of the Microsoft AZ-104 study materials is favourable. In order to meet a wide range of tastes, our company has developed the three versions of the Cisco 300-510 preparation questions, which includes PDF version, online test engine and windows software. Our company has established a long-term partnership with those who have purchased our VMware 6V0-32.24 exam guides. We can promise that the VMware 2V0-41.23 prep guide from our company will help you prepare for your exam well. And our CheckPoint 156-521 study materials always contain the latest exam Q&A.
Updated: May 28, 2022