350-401 Test Pattern practice materials stand the test of time and harsh market, convey their sense of proficiency with passing rate up to 98 to 100 percent. They are 100 percent guaranteed 350-401 Test Pattern learning quiz. And our content of the 350-401 Test Pattern exam questions are based on real exam by whittling down superfluous knowledge without delinquent mistakes. You can put all your queries and get a quick and efficient response as well as advice of our experts on 350-401 Test Pattern certification tests you want to take. Our professional online staff will attend you on priority. Those updates of our 350-401 Test Pattern exam questions will be sent to you accordingly for one year freely.
CCNP Enterprise 350-401 Do not be afraid of making positive changes.
Unlike some irresponsible companies who churn out some 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Pattern study guide, we are looking forward to cooperate fervently. Omgzlook will provide all the latest and accurate exam practice questions and answers for the staff to participate in 350-401 New Exam Camp Materials certification exam. Omgzlook is a professional website to specially provide training tools for IT certification exams and a good choice to help you pass 350-401 New Exam Camp Materials exam,too.
As far as our 350-401 Test Pattern study guide is concerned, the PDF version brings you much convenience with regard to the following advantage. The PDF version of our 350-401 Test Pattern learning materials contain demo where a part of questions selected from the entire version of our 350-401 Test Pattern exam quiz is contained. In this way, you have a general understanding of our 350-401 Test Pattern actual prep exam, which must be beneficial for your choice of your suitable exam files.
Cisco 350-401 Test Pattern - You can totally relay on us.
Quality should be tested by time and quantity, which is also the guarantee that we give you to provide 350-401 Test Pattern exam software for you. Continuous update of the exam questions, and professional analysis from our professional team have become the key for most candidates to pass 350-401 Test Pattern exam. The promise of "no help, full refund" is the motivation of our team. We will continue improving 350-401 Test Pattern exam study materials. We will guarantee that you you can share the latest 350-401 Test Pattern exam study materials free during one year after your payment.
Second, it is convenient for you to read and make notes with our versions of 350-401 Test Pattern exam materials. Last but not least, we will provide considerate on line after sale service for you in twenty four hours a day, seven days a week.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Cisco CCST-Networking - To pass this exam also needs a lot of preparation. After nearly ten years' efforts, now our company have become the topnotch one in the field, therefore, if you want to pass the Fortinet FCP_FML_AD-7.4 exam as well as getting the related certification at a great ease, I strongly believe that the Fortinet FCP_FML_AD-7.4 study materials compiled by our company is your solid choice. If you want to be familiar with the real test and grasp the rhythm in the real test, you can choose our IBM C1000-182 exam test engine to practice. It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related VMware 2V0-33.22PSE certification is the best way to show our professional ability, however, the VMware 2V0-33.22PSE exam is hard nut to crack but our VMware 2V0-33.22PSE preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the VMware 2V0-33.22PSE exam. Improve your professional ability with our SAP C_THR81_2311 certification.
Updated: May 28, 2022