It is the dumps that you can't help praising it. There are no better dumps at the moment. The dumps can let you better accurate understanding questions point of 350-401 Collection File exam so that you can learn purposefully the relevant knowledge. As far as concerned, the online mode for mobile phone clients has the same function. The 350-401 Collection File test materials are mainly through three learning modes, Pdf, Online and software respectively. So you can save your time to have a full preparation of 350-401 Collection File exam.
You final purpose is to get the 350-401 Collection File certificate.
Our high-quality 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Collection File} learning guide help the students know how to choose suitable for their own learning method, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Collection File study materials are a very good option. More importantly, it is evident to all that the Latest 350-401 Exam Cram Sheet File training materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market. If you want to pass the Latest 350-401 Exam Cram Sheet File exam and get the related certification in the shortest time, choosing the Latest 350-401 Exam Cram Sheet File training materials from our company will be in the best interests of all people.
All the preparation material reflects latest updates in 350-401 Collection File certification exam pattern. You may now download the 350-401 Collection File PDF documents in your smart devices and lug it along with you. You can effortlessly yield the printouts of 350-401 Collection File exam study material as well, PDF files make it extremely simple for you to switch to any topics with a click.
Cisco 350-401 Collection File - Their efficiency has far beyond your expectation!
If you try on our 350-401 Collection File exam braindumps, you will be very satisfied with its content and design. Trust me, you can't find anything better than our 350-401 Collection File study materials. If you think I am exaggerating, you can try it for yourself. We can provide you with a free trial version. If you try another version and feel that our 350-401 Collection File practice quiz are not bad, you can apply for another version of the learning materials again and choose the version that suits you best!
The moment you money has been transferred to our account, and our system will send our 350-401 Collection Filetraining dumps to your mail boxes so that you can download 350-401 Collection File exam questions directly. It is fast and convenient out of your imagination.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We can promise higher qualification rates for our Microsoft MB-330 exam question than materials of other institutions. Meanwhile, if you want to keep studying this course , you can still enjoy the well-rounded services by WGU Integrated-Physical-Sciences test prep, our after-sale services can update your existing WGU Integrated-Physical-Sciences study quiz within a year and a discount more than one year. Moreover, to write the Up-to-date EMC D-PWF-DS-23 practice braindumps, they never stop the pace of being better. Secondly, you can get our Cisco 200-301 practice test only in 5 to 10 minutes after payment, which enables you to devote yourself to study as soon as possible. With our test-oriented Adobe AD0-E716 test prep in hand, we guarantee that you can pass the Adobe AD0-E716 exam as easy as blowing away the dust, as long as you guarantee 20 to 30 hours practice with our Adobe AD0-E716 study materials.
Updated: May 28, 2022