The system of 350-401 Test Tips test guide will keep track of your learning progress in the whole course. Therefore, you can have 100% confidence in our 350-401 Test Tips exam guide. According to our overall evaluation and research, seldom do we have cases that customers fail the 350-401 Test Tips exam after using our study materials. And don't worry about how to pass the test, Omgzlook certification training will be with you. What is your dream? Don't you want to make a career? The answer must be ok. Our 350-401 Test Tips study braindumps are so popular in the market and among the candidates that is because that not only our 350-401 Test Tips learning guide has high quality, but also our 350-401 Test Tips practice quiz is priced reasonably, so we do not overcharge you at all.
CCNP Enterprise 350-401 Mostly choice is greater than effort.
CCNP Enterprise 350-401 Test Tips - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) With the rapid development of the economy, the demands of society on us are getting higher and higher. The content of our Latest 350-401 Exam Sims pass guide covers the most of questions in the actual test and all you need to do is review our Latest 350-401 Exam Sims vce dumps carefully before taking the exam. Then you can pass the actual test quickly and get certification easily.
The 350-401 Test Tips study braindumps are compiled by our frofessional experts who have been in this career fo r over ten years. Carefully written and constantly updated content of our 350-401 Test Tips exam questions can make you keep up with the changing direction of the exam, without aimlessly learning and wasting energy. In addition, there are many other advantages of our 350-401 Test Tips learning guide.
Cisco 350-401 Test Tips - .
If you want to through the Cisco 350-401 Test Tips certification exam to make a stronger position in today's competitive IT industry, then you need the strong expertise knowledge and the accumulated efforts. And pass the Cisco 350-401 Test Tips exam is not easy. Perhaps through Cisco 350-401 Test Tips exam you can promote yourself to the IT industry. But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose Omgzlook's Cisco 350-401 Test Tips exam training materials. This is training product that specifically made for IT exam. With it you can pass the difficult Cisco 350-401 Test Tips exam effortlessly.
You never know what you can get till you try. It is universally acknowledged that mock examination is of great significance for those who are preparing for the exam since candidates can find deficiencies of their knowledge as well as their shortcomings in the practice test, so that they can enrich their knowledge before the real 350-401 Test Tips exam.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
SAP C-S4FCF-2023 - God wants me to be a person who have strength, rather than a good-looking doll. WGU Organizational-Behaviors-and-Leadership - Are you still worried about the exam? Don’t worry! Salesforce JavaScript-Developer-I - The dumps contain all problems in the actual test. So many our customers have benefited form our Splunk SPLK-5002 preparation quiz, so will you! Network Appliance NS0-404 - Omgzlook practice test materials are used with no problem.
Updated: May 28, 2022