Besides, we check the update about 350-401 Questions And Answers training pdf every day. If there is any update, the newest and latest information will be added into the 350-401 Questions And Answers complete dumps, while the old and useless questions will be removed of the 350-401 Questions And Answers torrent. The hiogh quality and high pass rate can ensure you get high scores in the 350-401 Questions And Answers actual test. So, there is considerate and concerted cooperation for your purchasing experience accompanied with patient staff with amity. You can find them on our official website, and we will deal with everything once your place your order. You will grasp the overall knowledge points of 350-401 Questions And Answers actual test with our pass guide and the accuracy of our 350-401 Questions And Answers exam answers will enable you spend less time and effort.
CCNP Enterprise 350-401 We have benefited a lot from those changes.
You can choose Omgzlook's Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions And Answers exam training materials. In our software version of the 350-401 Prep Guide exam dumps, the unique point is that you can take part in the practice test before the real 350-401 Prep Guide exam. You never know what you can get till you try.
God wants me to be a person who have strength, rather than a good-looking doll. When I chose the IT industry I have proven to God my strength. But God forced me to keep moving.
Cisco 350-401 Questions And Answers - Many customers may be doubtful about our price.
Our 350-401 Questions And Answers preparation practice are highly targeted and have a high hit rate, there are a lot of learning skills and key points in the exam, even if your study time is very short, you can also improve your 350-401 Questions And Answers exam scores very quickly. Even if you have a week foundation, I believe that you will get the certification by using our 350-401 Questions And Answers study materials. We can claim that with our 350-401 Questions And Answers practice engine for 20 to 30 hours, you will be ready to pass the exam with confidence.
Our exam questions just need students to spend 20 to 30 hours practicing on the platform which provides simulation problems, can let them have the confidence to pass the 350-401 Questions And Answers exam, so little time great convenience for some workers. It must be your best tool to pass your exam and achieve your target.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
BICSI DCDC-003.1 - All in all, abandon all illusions and face up to reality bravely. You will never worry about the CWNP CWSP-207 exam. In the meantime, all your legal rights will be guaranteed after buying our Huawei H19-438_V1.0 study materials. So we never stop the pace of offering the best services and CompTIA SY0-601 practice materials for you. Even the OMG OMG-OCUP2-FOUND100 test syllabus is changing every year; our experts still have the ability to master the tendency of the important knowledge as they have been doing research in this career for years.
Updated: May 28, 2022