You should concentrate on finishing all exercises once you are determined to pass the 350-401 Exam exam. The number of questions of the 350-401 Exam study materials you have done has a great influence on your passing rate. As for our study materials, we have prepared abundant exercises for you to do. Our 350-401 Exam training material comes with 100% money back guarantee to ensure the reliable and convenient shopping experience. The accurate, reliable and updated Cisco 350-401 Exam study torrent are compiled, checked and verified by our senior experts, which can ensure you 100% pass. The high quality of our products also embodies in its short-time learning.
CCNP Enterprise 350-401 Add Omgzlook's products to cart now!
350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam practice quiz is equipped with a simulated examination system with timing function, allowing you to examine your 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam learning results at any time, keep checking for defects, and improve your strength. We promise that we will do our best to help you pass the Cisco certification Test 350-401 Papers exam. Omgzlook's providing training material is very close to the content of the formal examination.
By clearing different Cisco exams, you can easily land your dream job. If you are looking to find high paying jobs, then Cisco certifications can help you get the job in the highly reputable organization. Our 350-401 Exam exam materials give real exam environment with multiple learning tools that allow you to do a selective study and will help you to get the job that you are looking for.
Cisco 350-401 Exam - But it is not easy to pass the exam.
Our 350-401 Exam free demo provides you with the free renewal in one year so that you can keep track of the latest points happening. As the questions of exams of our 350-401 Exam exam dumps are more or less involved with heated issues and customers who prepare for the exams must haven’t enough time to keep trace of exams all day long, our 350-401 Exam practice engine can serve as a conducive tool for you make up for those hot points you have ignored. You will be completed ready for your 350-401 Exam exam.
One is PDF, and other is software, it is easy to download. The IT professionals and industrious experts in Omgzlook make full use of their knowledge and experience to provide the best products for the candidates.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our company owns the most popular reputation in this field by providing not only the best ever Microsoft AZ-700 study guide but also the most efficient customers’ servers. SAP P-SAPEA-2023 - My dream is to become a top IT expert. Cisco 700-805 - If you have any question that you don't understand, just contat us and we will give you the most professional advice immediately. CompTIA 220-1102 - In real life, every great career must have the confidence to take the first step. The more time you spend in the preparation for CompTIA CAS-005 learning engine, the higher possibility you will pass the exam.
Updated: May 28, 2022