If you want to get the related certification in an efficient method, please choose the 350-401 Sheet learning dumps from our company. We can guarantee that the study materials from our company will help you pass the exam and get the certification in a relaxed and efficient method. More and more people look forward to getting the 350-401 Sheet certification by taking an exam. This is hard to find and compare with in the market. And numerous enthusiastic feedbacks from our worthy clients give high praises not only on our 350-401 Sheet study guide, but also on our sincere and helpful 24 hours customer services online. Our company has successfully created ourselves famous brands in the past years, and more importantly, all of the 350-401 Sheet exam braindumps from our company have been authenticated by the international authoritative institutes and cater for the demands of all customers at the same time.
You can ask anyone who has used 350-401 Sheet actual exam.
CCNP Enterprise 350-401 Sheet - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) This greatly improves the students' availability of fragmented time. With our Reliable Exam 350-401 Questions Explanations test prep, you don't have to worry about the complexity and tediousness of the operation. As long as you enter the learning interface of our soft test engine of Reliable Exam 350-401 Questions Explanations quiz guide and start practicing on our Windows software, you will find that there are many small buttons that are designed to better assist you in your learning.
Can you survive and be invincible in a highly competitive society? Can you gain a foothold in such a complex society? If your answer is "no", that is because your ability is not strong enough. Our 350-401 Sheet test braindumps can help you improve your abilities. Once you choose our learning materials, your dream that you have always been eager to get Cisco certification which can prove your abilities will realized.
Our Cisco 350-401 Sheet exam questions are your best choice.
According to the survey, the average pass rate of our candidates has reached 99%. High passing rate must be the key factor for choosing, which is also one of the advantages of our 350-401 Sheet real study dumps. Our 350-401 Sheet exam questions have been widely acclaimed among our customers, and the good reputation in industry prove that choosing our study materials would be the best way for you, and help you gain the 350-401 Sheet certification successfully. With about ten years’ research and development we still keep updating our 350-401 Sheet prep guide, in order to grasp knowledge points in accordance with the exam, thus your study process would targeted and efficient.
According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the 350-401 Sheet exam. Our 350-401 Sheet learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our 350-401 Sheet exam engine.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
The content of our UiPath UiPath-ABAv1 practice engine is based on real exam by whittling down superfluous knowledge without delinquent mistakes rather than dropping out of reality. On the one hand, our ISACA CISA-KR learning questions engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies, thus you can 100% trust our ISACA CISA-KR exam engine. And you will feel grateful if you choose our Fortinet NSE7_NST-7.2 exam questions. We use the 99% pass rate to prove that our SAP C-BW4H-2404 practice materials have the power to help you go through the exam and achieve your dream. By browsing this website, all there versions of Linux Foundation FOCP training materials can be chosen according to your taste or preference.
Updated: May 28, 2022