After the client pay successfully they could receive the mails about 350-401 Test Cost guide questions our system sends by which you can download our test bank and use our study materials in 5-10 minutes. The mail provides the links and after the client click on them the client can log in and gain the 350-401 Test Cost study materials to learn. For the client the time is limited and very important and our product satisfies the client’s needs to download and use our 350-401 Test Cost practice engine immediately. You can first download Omgzlook's free exercises and answers about Cisco certification 350-401 Test Cost exam as a try, then you will feel that Omgzlook give you a reassurance for passing the exam. If you choose Omgzlook to provide you with the pertinence training, you can easily pass the Cisco certification 350-401 Test Cost exam. For these great merits we can promise to you that if you buy our 350-401 Test Cost study materials you will pass the test without difficulties.
CCNP Enterprise 350-401 A bad situation can show special integrity.
And we believe you will pass the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Cost exam just like the other people! If a person is strong-willed, it is close at hand. I think you should be such a person.
Our 350-401 Test Costpractice materials will provide you with a platform of knowledge to help you achieve your dream. As you know, our v practice exam has a vast market and is well praised by customers. All you have to do is to pay a small fee on our 350-401 Test Cost practice materials, and then you will have a 99% chance of passing the exam and then embrace a good life.
Cisco 350-401 Test Cost - Our key advantages are that 1.
Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our 350-401 Test Cost exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our 350-401 Test Cost study materials. And most of all, you will get reward by our 350-401 Test Cost training engine in the least time with little effort.
If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our Cisco 350-401 Test Cost exam review questions and you will clear exams.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
It is known to us that more and more companies start to pay high attention to the Microsoft PL-400-KR certification of the candidates. We offer you the most accurate Huawei H12-811_V1.0 exam answers that will be your key to pass the certification exam in your first try. Adobe AD0-E908 - So stop hesitation and buy our study materials. The Fortinet FCP_FWB_AD-7.4 test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. So you just need to memorize our correct questions and answers of the VMware 2V0-11.24 study materials.
Updated: May 28, 2022