On the one hand, our company hired the top experts in each qualification examination field to write the H31-161 Reliable Test Guide Materials prepare dump, so as to ensure that our products have a very high quality, so that users can rest assured that the use of our research materials. On the other hand, under the guidance of high quality research materials, the rate of adoption of the H31-161 Reliable Test Guide Materials exam guide is up to 98% to 100%. Of course, it is necessary to qualify for a qualifying exam, but more importantly, you will have more opportunities to get promoted in the workplace. When we choose the employment work, you will meet a bottleneck, how to let a company to choose you to be a part of him? We would say ability, so how does that show up? There seems to be only one quantifiable standard to help us get a more competitive job, which is to get the test H31-161 Reliable Test Guide Materialscertification and obtain a qualification. If you want to have a good employment platform, then take office at the same time there is a great place to find that we have to pay attention to the importance of qualification examination. And we can claim that if you study with our H31-161 Reliable Test Guide Materials study materials for 20 to 30 hours, you will pass the exam with ease.
HCIE-Carrier IP H31-161 You can learn anytime, anywhere.
Our H31-161 - HCIE-Carrier IP (Written) Reliable Test Guide Materials study guide can help you improve in the shortest time. At the fork in the road, we always face many choices. When we choose job, job are also choosing us.
Don't you think it is quite amazing? Just come and have a try! You may find that there are a lot of buttons on the website which are the links to the information that you want to know about our H31-161 Reliable Test Guide Materials exam braindumps. Also the useful small buttons can give you a lot of help on our H31-161 Reliable Test Guide Materials study guide.
Huawei H31-161 Reliable Test Guide Materials - We will never neglect any user.
Our company is open-handed to offer benefits at intervals, with H31-161 Reliable Test Guide Materials learning questions priced with reasonable prices. Almost all kinds of working staffs can afford our price, even the students. And we will give some discounts from time to time. Although our H31-161 Reliable Test Guide Materials practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the H31-161 Reliable Test Guide Materials exam.
H31-161 Reliable Test Guide Materials training guide’s powerful network and 24-hour online staff can meet your needs. First of all, we can guarantee that you will not encounter any obstacles in the payment process.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 2
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 3
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
Dell D-PWF-DY-A-00 - They are unsuspecting experts who you can count on. Therefore, choosing a proper SAP C_HRHFC_2405 exam guide can pave the path for you which is also conductive to gain the certification efficiently. So Microsoft PL-900-KR exam dumps are definitely valuable acquisitions. Juniper JN0-223 - Don't hesitate! We make EMC D-NWG-DS-00 exam prep from exam candidate perspective, and offer high quality practice materials with reasonable prices but various benefits.
Updated: May 27, 2022