We hold coherent direction with our exam candidates, so our 350-401 Reliable Test Camp Sheet study materials are compiled in modern format. Many competitors simulate and strive to emulate our standard, but our 350-401 Reliable Test Camp Sheet training branindumps outstrip others in many aspects, so it is incumbent on us to offer help. Considering the current plea of our exam candidates we make up our mind to fight for your satisfaction and wish to pass the 350-401 Reliable Test Camp Sheet exam. Although the 350-401 Reliable Test Camp Sheet exam prep is of great importance, you do not need to be over concerned about it. With scientific review and arrangement from professional experts as your backup, and the most accurate and high quality content of our 350-401 Reliable Test Camp Sheet study materials, you will cope with it like a piece of cake. First of all, you are able to make full use of our 350-401 Reliable Test Camp Sheet learning dumps through three different versions: PDF, PC and APP online version.
CCNP Enterprise 350-401 The downloading process is operational.
Nowadays, having knowledge of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Test Camp Sheet study braindumps become widespread, if you grasp solid technological knowledge, you are sure to get a well-paid job and be promoted in a short time. As a result, many students have bought materials that are not suitable for them and have wasted a lot of money. But 350-401 Dumps Free guide torrent will never have similar problems, not only because 350-401 Dumps Free exam torrent is strictly compiled by experts according to the syllabus, which are fully prepared for professional qualification examinations, but also because 350-401 Dumps Free guide torrent provide you with free trial services.
As long as you spare one or two hours a day to study with our latest 350-401 Reliable Test Camp Sheet quiz prep, we assure that you will have a good command of the relevant knowledge before taking the exam. What you need to do is to follow the 350-401 Reliable Test Camp Sheet exam guide system at the pace you prefer as well as keep learning step by step. Under the support of our study materials, passing the exam won’t be an unreachable mission.
Cisco 350-401 Reliable Test Camp Sheet - The experts will update the system every day.
Our 350-401 Reliable Test Camp Sheet learning materials help you to easily acquire the 350-401 Reliable Test Camp Sheet certification even if you have never touched the relative knowledge before. With our 350-401 Reliable Test Camp Sheet exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. You will have higher wages and a better development platform. What are you waiting for? Come and buy 350-401 Reliable Test Camp Sheet study guide now!
Although the three major versions of our 350-401 Reliable Test Camp Sheet exam dumps provide a demo of the same content for all customers, they will meet different unique requirements from a variety of users based on specific functionality. The most important feature of the online version of our 350-401 Reliable Test Camp Sheet learning materials are practicality.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
EMC D-VXR-OE-23 - For most users, access to the relevant qualifying examinations may be the first, so many of the course content related to qualifying examinations are complex and arcane. Our SASInstitute A00-406 exam materials draw lessons from the experience of failure, will all kinds of qualification examination has carried on the classification of clear layout, at the same time the user when they entered the SASInstitute A00-406 study dumps page in the test module classification of clear, convenient to use a very short time to find what they want to study, which began the next exercise. If you can choose to trust us, I believe you will have a good experience when you use the ASQ CQE-KR study guide, and you can pass the exam and get a good grade in the test ASQ CQE-KR certification. SAP C-TS422-2023 - You must make a decision as soon as possible! CompTIA SY0-701 - If we miss the opportunity, we will accomplish nothing.
Updated: May 28, 2022