As a responsible company, we don't ignore customers after the deal, but will keep an eye on your exam situation. Although we can assure you the passing rate of our 350-401 New Practice Questions Pdf training guide nearly 100 %, we can also offer you a full refund if you still have concerns. So you have nothing to worry about, only to study with our 350-401 New Practice Questions Pdf exam questions with full attention. The hiogh quality and high pass rate can ensure you get high scores in the 350-401 New Practice Questions Pdf actual test. Get the Cisco certification to validate your IT expertise and broaden your network to get more improvement in your career. So, there is considerate and concerted cooperation for your purchasing experience accompanied with patient staff with amity.
CCNP Enterprise 350-401 Moreover, we have Demos as freebies.
With our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Practice Questions Pdf study materials, you can have different and pleasure study experience as well as pass 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Practice Questions Pdf exam easily. If you decide to buy our New 350-401 Test Questions Answers test guide, the online workers of our company will introduce the different function to you. You will have a deep understanding of the three versions of our New 350-401 Test Questions Answers exam questions.
As we will find that, get the test 350-401 New Practice Questions Pdf certification, acquire the qualification of as much as possible to our employment effect is significant. But how to get the test 350-401 New Practice Questions Pdf certification didn't own a set of methods, and cost a lot of time to do something that has no value. With our 350-401 New Practice Questions Pdf exam Practice, you will feel much relax for the advantages of high-efficiency and accurate positioning on the content and formats according to the candidates’ interests and hobbies.
Cisco 350-401 New Practice Questions Pdf - They have always been in a trend of advancement.
One of the significant advantages of our 350-401 New Practice Questions Pdf exam material is that you can spend less time to pass the exam. People are engaged in modern society. So our goal is to achieve the best learning effect in the shortest time. So our 350-401 New Practice Questions Pdf test prep will not occupy too much time. You might think that it is impossible to memorize well all knowledge. We can tell you that our 350-401 New Practice Questions Pdf test prep concentrate on systematic study, which means all your study is logic. Why not give us a chance to prove? Our 350-401 New Practice Questions Pdf guide question dumps will never let you down.
As long as you practice our 350-401 New Practice Questions Pdf test question, you can pass exam quickly and successfully. By using them, you can not only save your time and money, but also pass 350-401 New Practice Questions Pdf practice exam without any stress.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Microsoft MB-500 - One of the great advantages is that you will soon get a feedback after you finish the exercises. With ISACA CISA learning dumps, you only need to spend 20-30 hours on studying, and then you can easily pass the exam. Fortinet FCSS_SASE_AD-23 - You can consult online no matter what problems you encounter. MuleSoft MCIA-Level-1 - In addition, we clearly know that constant improvement is of great significance to the survival of a company. Using Huawei H13-313_V1.0 exam prep is an important step for you to improve your soft power.
Updated: May 28, 2022