Are you still searching proper 350-401 Reliable Real Test Answer exam study materials, or are you annoying of collecting these study materials? As the professional IT exam dumps provider, Omgzlook has offered the complete 350-401 Reliable Real Test Answer exam materials for you. So you can save your time to have a full preparation of 350-401 Reliable Real Test Answer exam. As a matter of fact, since the establishment, we have won wonderful feedback and ceaseless business, continuously working on developing our 350-401 Reliable Real Test Answer test prep. We have been specializing 350-401 Reliable Real Test Answer exam dumps many years and have a great deal of long-term old clients, and we would like to be a reliable cooperator on your learning path and in your further development. Your success is the success of our Omgzlook, and therefore, we will try our best to help you obtain 350-401 Reliable Real Test Answer exam certification.
CCNP Enterprise 350-401 We will provide you with thoughtful service.
We are ready to show you the most reliable 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Real Test Answer pdf vce and the current exam information for your preparation of the test. Our Test 350-401 Sample learning materials are new but increasingly popular choices these days which incorporate the newest information and the most professional knowledge of the practice exam. All points of questions required are compiled into our Test 350-401 Sample preparation quiz by experts.
Our 350-401 Reliable Real Test Answer exam dumps are required because people want to get succeed in IT field by clearing the certification exam. Passing 350-401 Reliable Real Test Answer practice exam is not so easy and need to spend much time to prepare the training materials, that's the reason that so many people need professional advice for 350-401 Reliable Real Test Answer exam prep. The 350-401 Reliable Real Test Answer dumps pdf are the best guide for them passing test.
Cisco 350-401 Reliable Real Test Answer - It is so cool even to think about it.
In this highly competitive modern society, everyone needs to improve their knowledge level or ability through various methods so as to obtain a higher social status. Under this circumstance passing 350-401 Reliable Real Test Answer exam becomes a necessary way to improve oneself. And you are lucky to find us for we are the most popular vendor in this career and have a strong strength on providing the best 350-401 Reliable Real Test Answer study materials. And the price of our 350-401 Reliable Real Test Answer practice engine is quite reasonable.
The innovatively crafted dumps will serve you the best; imparting you information in fewer number of questions and answers. Created on the exact pattern of the actual 350-401 Reliable Real Test Answer tests, Omgzlook’s dumps comprise questions and answers and provide all important 350-401 Reliable Real Test Answer information in easy to grasp and simplified content.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
ACFE CFE - So for us, with one more certification, we will have one more bargaining chip in the future. You can only get the most useful and efficient SAP C-LIXEA-2404 guide materials with the most affordable price from our company, since we aim to help as many people as possible rather than earning as much money as possible. Microsoft AZ-400 - In fact, our aim is the same with you. Our high-quality Salesforce Salesforce-Hyperautomation-Specialist} learning guide help the students know how to choose suitable for their own learning method, our Salesforce Salesforce-Hyperautomation-Specialist study materials are a very good option. As is known to us, there are best sale and after-sale service of the Salesforce Sales-Cloud-Consultant certification training dumps all over the world in our company.
Updated: May 28, 2022