They are the versions of the PDF, Software and APP online. You can choose the one which is your best suit of our 350-401 Format study materials according to your study habits. Our 350-401 Format exam materials have plenty of advantages. You can install it to as many computers as you need as long as the computer is in Windows system. And our software of the 350-401 Format training material also allows different users to study at the same time. We strongly advise you to have a brave attempt.
CCNP Enterprise 350-401 You may try it!
CCNP Enterprise 350-401 Format - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) In fact, as long as you take the right approach, everything is possible. If you buy our Practice 350-401 Test Engine test prep you will pass the exam easily and successfully，and you will realize you dream to find an ideal job and earn a high income. Our product is of high quality and the passing rate and the hit rate are both high.
At the moment, you must not miss Omgzlook 350-401 Format certification training materials which are your unique choice. Even if you spend a small amount of time to prepare for 350-401 Format certification, you can also pass the exam successfully with the help of Omgzlook Cisco 350-401 Format braindump. Because Omgzlook exam dumps contain all questions you can encounter in the actual exam, all you need to do is to memorize these questions and answers which can help you 100% pass the exam.
Cisco 350-401 Format - They can be obtained within five minutes.
If you fail, don't forget to learn your lesson. If you still prepare for your test yourself and fail again and again, it is time for you to choose a valid 350-401 Format study guide; this will be your best method for clearing exam and obtain a certification. Good 350-401 Format study guide will be a shortcut for you to well-directed prepare and practice efficiently, you will avoid do much useless efforts and do something interesting. Omgzlook releases 100% pass-rate 350-401 Format study guide files which guarantee candidates 100% pass exam in the first attempt.
If you like to take notes randomly according to your own habits while studying, we recommend that you use the PDF format of our 350-401 Format study guide. And besides, you can take it with you wherever you go for it is portable and takes no place.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
We constantly check the updating of Salesforce Salesforce-Loyalty-Management vce pdf to follow the current exam requirement and you will be allowed to free update your pdf files one-year. We often ask, what is the purpose of learning? Why should we study? Why did you study for Fortinet NSE6_FSW-7.2exam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning Fortinet NSE6_FSW-7.2 exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test Fortinet NSE6_FSW-7.2 certification, get a certificate, to prove better us, to pave the way for our future life. Our website aimed to helping you and fully supporting you to pass CompTIA SY0-601-KR actual test with high passing score in your first try. If you are willing to try our Huawei H12-711_V4.0 study materials, we believe you will not regret your choice. Now, let’s prepare for the exam test with the Salesforce Marketing-Cloud-Developer training pdf offered by Omgzlook.
Updated: May 28, 2022