350-401 New Exam Collection Free actual test guide is your best choice. The rapid development of information will not infringe on the learning value of our 350-401 New Exam Collection Free exam questions, because our customers will have the privilege to enjoy the free update for one year. You will receive the renewal of 350-401 New Exam Collection Free study files through the email. That is because our company beholds customer-oriented tenets that guide our everyday work. The achievements of wealth or prestige is no important than your exciting feedback about efficiency and profession of our 350-401 New Exam Collection Free study guide. The next thing you have to do is stick with it.
CCNP Enterprise 350-401 Don't doubt about it.
We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Exam Collection Free test guide have reached as high as 99%, which definitely ranks the top among our peers. Imagine, if you're using a 350-401 Learning Materials practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the 350-401 Learning Materials test material can avoid these risks very well.
All in all, high efficiency of 350-401 New Exam Collection Free exam material is the reason for your selection. We understand our candidates have no time to waste, everyone wants an efficient learning. So we take this factor into consideration, develop the most efficient way for you to prepare for the 350-401 New Exam Collection Free exam, that is the real questions and answers practice mode, firstly, it simulates the real Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test environment perfectly, which offers greatly help to our customers.
Cisco 350-401 New Exam Collection Free - Our experts have taken your worries seriously.
The content system of 350-401 New Exam Collection Free exam simulation is constructed by experts. After-sales service of our study materials is also provided by professionals. If you encounter some problems when using our 350-401 New Exam Collection Free study materials, you can also get them at any time. After you choose 350-401 New Exam Collection Free preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results.
Please check it carefully. If you need the invoice, please contact our online workers.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of EMC D-ISM-FN-23 training questions, you will agree with what I said. Juniper JN0-649 - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. But our Fortinet FCSS_NST_SE-7.4 exam questions really did. We can be sure that with the professional help of our Google Professional-Cloud-Developer test guide you will surely get a very good experience. MuleSoft MCPA-Level-1 - The comprehensive coverage would be beneficial for you to pass the exam.
Updated: May 28, 2022