Our 350-401 Study Plan actual exam comprise of a number of academic questions for your practice, which are interlinked and helpful for your exam. And there are all key points in the 350-401 Study Plan exam questions. Our 350-401 Study Plan study guide will be the best choice for your time, money and efforts. After you buy the PDF version of our 350-401 Study Plan study material, you will get an E-mail form us in 5 to 10 minutes after payment.Once any new question is found, we will send you a link to download a new version of the 350-401 Study Plan training engine. So don't worry if you are left behind the trend. So our high quality and high efficiency 350-401 Study Plan practice materials conciliate wide acceptance around the world.
CCNP Enterprise 350-401 These interactions have inspired us to do better.
CCNP Enterprise 350-401 Study Plan - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Only when we pass the exam can we find the source of life and enthusiasm, become active and lasting, and we can have better jobs in today’s highly competitive times. Our 350-401 Valid Test Guide Files exam materials boost high passing rate and if you are unfortunate to fail in exam we can refund you in full at one time immediately. The learning costs you little time and energy and you can commit yourself mainly to your jobs or other important things.
We can guarantee that the study materials from our company will help you pass the exam and get the certification in a relaxed and efficient method. More and more people look forward to getting the 350-401 Study Plan certification by taking an exam. However, the exam is very difficult for a lot of people.
Cisco 350-401 Study Plan - Other workers are also dedicated to their jobs.
Omgzlook is a website to provide IT certification exam training tool for people who attend IT certification exam examinee. Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions. IN a short time of using Omgzlook's simulation test, you can 100% pass the exam. So spending a small amount of time and money in exchange for such a good result is worthful. Please add Omgzlook's training tool in your shopping cart now.
You can click to see the comments of the 350-401 Study Plan exam braindumps and how we changed their life by helping them get the 350-401 Study Plan certification. And you can also see the pass rate of our 350-401 Study Plan learning guide high as 98% to 100%, we can give you a promising future.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Salesforce B2C-Commerce-Architect - If these training products do not help you pass the exam, we guarantee to refund the full purchase cost. No matter where you are or what you are, Nutanix NCS-Core practice questions promises to never use your information for commercial purposes. Veeam VMCE_v12 - Here, I recommend a good learning materials website. Our SAP C_S4FTR_2023 study materials may become your right man. SAP C-S4TM-2023 - Our training materials have through the test of practice.
Updated: May 28, 2022