Before purchasing, you may be confused about what kind of 350-401 New Exam Camp Pdf guide questions you need. You can consult our staff online. After the consultation, your doubts will be solved and you will choose the 350-401 New Exam Camp Pdf learning materials that suit you. In the annual examination questions, our 350-401 New Exam Camp Pdf study questions have the corresponding rules to summarize, and can accurately predict this year's test hot spot and the proposition direction. This allows the user to prepare for the test full of confidence. They can greatly solve your problem-solving abilities.
CCNP Enterprise 350-401 And we have become a popular brand in this field.
CCNP Enterprise 350-401 New Exam Camp Pdf - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Untenable materials may waste your time and energy during preparation process. For many people, it’s no panic passing the Test 350-401 Guide Online exam in a short time. Luckily enough，as a professional company in the field of Test 350-401 Guide Online practice questions ,our products will revolutionize the issue.
We guarantee that you can pass the exam at one time even within one week based on practicing our 350-401 New Exam Camp Pdf exam materials regularly. 98 to 100 percent of former exam candidates have achieved their success by the help of our 350-401 New Exam Camp Pdf practice questions. And we have been treated as the best friend as our 350-401 New Exam Camp Pdf training guide can really help and change the condition which our loyal customers are in and give them a better future.
Cisco 350-401 New Exam Camp Pdf - Join us and you will be one of them.
As we all know, it is difficult to prepare the 350-401 New Exam Camp Pdf exam by ourselves. Excellent guidance is indispensable. If you urgently need help, come to buy our study materials. Our company has been regarded as the most excellent online retailers of the 350-401 New Exam Camp Pdf exam question. So our assistance is the most professional and superior. You can totally rely on our study materials to pass the exam. All the key and difficult points of the 350-401 New Exam Camp Pdf exam have been summarized by our experts. They have rearranged all contents, which is convenient for your practice. Perhaps you cannot grasp all crucial parts of the 350-401 New Exam Camp Pdf study tool by yourself. You also can refer to other candidates’ review guidance, which might give you some help. Then we can offer you a variety of learning styles. Our printable 350-401 New Exam Camp Pdf real exam dumps, online engine and windows software are popular among candidates. So you will never feel bored when studying on our 350-401 New Exam Camp Pdf study tool.
To be convenient for the learners, our 350-401 New Exam Camp Pdf certification questions provide the test practice software to help the learners check their learning results at any time. Our 350-401 New Exam Camp Pdf study practice guide takes full account of the needs of the real exam and conveniences for the clients.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
EC-COUNCIL 312-38 - If you fail to pass the exam, we will give a full refund. If you also look forward to change your present boring life, maybe trying your best to have the IBM S2000-020 latest questions are a good choice for you. Splunk SPLK-3003 - A large number of buyers pouring into our website every day can prove this. Although we come across some technical questions of our SAP C-S4FTR-2023 learning guide during development process, we still never give up to developing our SAP C-S4FTR-2023 practice engine to be the best in every detail. Cisco 200-301 - You can free download the demos to have a look at our quality and the accuracy of the content easily.
Updated: May 28, 2022