Most of the experts have been studying in the professional field for many years and have accumulated much experience in our 350-401 Fresh Dumps practice questions. The high-quality of our 350-401 Fresh Dumps exam questions are praised by tens of thousands of our customers. You may try it! With it, you will pass the exam easily. If you pass the exam, you will have the self-confidence, with the confidence you will succeed. Our product is of high quality and the passing rate and the hit rate are both high.
CCNP Enterprise 350-401 They can be obtained within five minutes.
CCNP Enterprise 350-401 Fresh Dumps - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) If you fail, don't forget to learn your lesson. And besides, you can take it with you wherever you go for it is portable and takes no place. So the PDF version of our 350-401 Valid Practice Questions Pdf exam questions is convenient.
Downloading the 350-401 Fresh Dumps free demo doesn't cost you anything and you will learn about the pattern of our practice exam and the accuracy of our 350-401 Fresh Dumps test answers. We constantly check the updating of 350-401 Fresh Dumps vce pdf to follow the current exam requirement and you will be allowed to free update your pdf files one-year. Don't hesitate to get help from our customer assisting.
Cisco 350-401 Fresh Dumps - And a brighter future is waiting for you.
Discount is being provided to the customer for the entire Cisco 350-401 Fresh Dumps preparation suite. These 350-401 Fresh Dumps learning materials include the 350-401 Fresh Dumps preparation software & PDF files containing sample Interconnecting Cisco 350-401 Fresh Dumps and answers along with the free 90 days updates and support services. We are facilitating the customers for the Cisco 350-401 Fresh Dumps preparation with the advanced preparatory tools.
We believe our study materials will be very useful and helpful for all people who are going to prepare for the 350-401 Fresh Dumps exam. There are a lot of excellent experts and professors in our company.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Our SAP C-C4H320-34 study materials offer you a free trial service, and you can download our trial questions bank for free. The PDF version of the CompTIA SY0-701 exam prep has many special functions, including download the demo for free, support the printable format and so on. WGU Integrated-Physical-Sciences - Omgzlook's experts have simplified the complex concepts and have added examples, simulations and graphs to explain whatever could be difficult for you to understand. Huawei H19-308_V4.0 - No one complain about the complexity of their jobs. You can also avail of the free demo so that you will have an idea how convenient and effective our Cisco 350-401 exam dumps are for Cisco 350-401 certification.
Updated: May 28, 2022