In fact, all of the three versions of the H31-161 Latest Braindumps Files practice prep are outstanding. You will enjoy different learning interests under the guidance of the three versions of H31-161 Latest Braindumps Files training guide. Our three versions of H31-161 Latest Braindumps Files exam braindumps are the PDF, Software and APP online and they are all in good quality. Omgzlook can give you a brighter future. Omgzlook Huawei H31-161 Latest Braindumps Files exam training materials can help you to come true your dreams. Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the H31-161 Latest Braindumps Files exam with our study materials in the shortest time.
HCIE-Carrier IP H31-161 With it you can secure your career.
In fact, our H31-161 - HCIE-Carrier IP (Written) Latest Braindumps Files exam questions have helped tens of thousands of our customers successfully achieve their certification. The curtain of life stage may be opened at any time, the key is that you are willing to show, or choose to avoid. Most of People who can seize the opportunityin front of them are successful.
And you can free download the demo s to check it out. You can use H31-161 Latest Braindumps Files guide materials through a variety of electronic devices. At home, you can use the computer and outside you can also use the phone.
Huawei H31-161 Latest Braindumps Files - It can help you to pass the exam successfully.
With H31-161 Latest Braindumps Files study engine, you will get rid of the dilemma that you work hard but cannot improve. With our H31-161 Latest Braindumps Files learning materials, you can spend less time but learn more knowledge than others. H31-161 Latest Braindumps Files exam questions will help you reach the peak of your career. Just think of that after you get the H31-161 Latest Braindumps Files certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes! what a brighter future!
And allows you to work in the field of information technology with high efficiency. You have seen Omgzlook's Huawei H31-161 Latest Braindumps Files exam training materials, it is time to make a choice.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
In order to facilitate the user's offline reading, the SAP C-S43-2023 study braindumps can better use the time of debris to learn, especially to develop PDF mode for users. Microsoft PL-500 - If you want to change the dream into reality, you only need to choose the professional training. For we have three different versions of our Salesforce Data-Cloud-Consultant study guide, and you will have different feelings if you have a try on them. Palo Alto Networks PCNSC - This training materials is what IT people are very wanted. At present, our EMC D-ECS-DY-23study materials can give you a ray of hope.
Updated: May 27, 2022