Our exam materials are including all the questions which the exam required. So the materials will be able to help you to pass the exam. In recent years, fierce competition agitates the forwarding IT industry in the world. Just only dozens of money on H31-161 Instant Access latest study guide will assist you 100% pass exam and 24-hours worm aid service. Do you want to double your salary in a short time? Yes, it is not a dream. Omgzlook is an excellent source of information on IT Certifications.
HCIE-Carrier IP H31-161 It can be used on Phone, Ipad and so on.
HCIE-Carrier IP H31-161 Instant Access - HCIE-Carrier IP (Written) So you don’t need to wait for a long time and worry about the delivery time or any delay. The most important is that our test engine enables you practice H31-161 Test Sims exam pdf on the exact pattern of the actual exam. Our IT professionals have made their best efforts to offer you the latest H31-161 Test Sims study guide in a smart way for the certification exam preparation.
Because our materials not only has better quality than any other same learn products, but also can guarantee that you can pass the H31-161 Instant Access exam with ease. With the rapid development of computer, network, and semiconductor techniques, the market for people is becoming more and more hotly contested. Passing a H31-161 Instant Access exam to get a certificate will help you to look for a better job and get a higher salary.
Huawei H31-161 Instant Access - Life is full of ups and downs.
Although a lot of products are cheap, but the quality is poor, perhaps users have the same concern for our latest H31-161 Instant Access exam dump. Here, we solemnly promise to users that our product error rate is zero. Everything that appears in our products has been inspected by experts. In our H31-161 Instant Access practice materials, users will not even find a small error, such as spelling errors or grammatical errors. It is believed that no one is willing to buy defective products, so, the H31-161 Instant Access study guide has established a strict quality control system. The entire compilation and review process for latest H31-161 Instant Access exam dump has its own set of normative systems, and the H31-161 Instant Access practice materials have a professional proofreader to check all content. Only through our careful inspection, the study material can be uploaded to our platform. So, please believe us, 0 error rate is our commitment.
Also, your payment information of the H31-161 Instant Access study materials will be secret. No one will crack your passwords.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 2
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 3
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
In general, users can only wait about 5-10 minutes to receive our SAP C-S4EWM-2023 learning material, and if there are any problems with the reception, users may contact our staff at any time. Based on the statistics, prepare the exams under the guidance of our Pegasystems PEGACPCSD23V1 practice materials, the user's pass rate is up to 98% to 100%, And they only need to practice latest Pegasystems PEGACPCSD23V1 exam dump to hours. VMware 6V0-32.24 - In the current market, there are too many products of the same type. Salesforce Energy-and-Utilities-Cloud - According to different audience groups, our products for the examination of the teaching content of a careful division, so that every user can find a suitable degree of learning materials. Or, you can consult someone who has participated in the Splunk SPLK-5002 exam.
Updated: May 27, 2022