Our 350-401 Valid Braindumps Ebook exam materials constantly attract students to transfer their passion into progresses for the worldwide feedbacks from our loyal clients prove that we are number one in this field to help them achieve their dream in the 350-401 Valid Braindumps Ebook exam. Though you can participate in the use of important factors, only the guarantee of high quality, to provide students with a better teaching method, thus our 350-401 Valid Braindumps Ebook study dumps bring more outstanding teaching effect. Our 350-401 Valid Braindumps Ebook test engine is very intelligence and can help you experienced the interactive study. In addition, you will get the scores after each 350-401 Valid Braindumps Ebook practice test, which can make you know about the weakness and strengthen about the 350-401 Valid Braindumps Ebook real test , then you can study purposefully. With the Software version of our 350-401 Valid Braindumps Ebook study materilas, you can have the experience of the real exam which is very helpful for some candidates who lack confidence or experice of our 350-401 Valid Braindumps Ebook training guide.
CCNP Enterprise 350-401 Many customers may be doubtful about our price.
Even if you have a week foundation, I believe that you will get the certification by using our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Valid Braindumps Ebook study materials. Our exam questions just need students to spend 20 to 30 hours practicing on the platform which provides simulation problems, can let them have the confidence to pass the 350-401 Latest Test Tutorial exam, so little time great convenience for some workers. It must be your best tool to pass your exam and achieve your target.
And our 350-401 Valid Braindumps Ebook study materials are always considered the guarantee to pass the exam. You are the best and unique in the world. Just be confident to face new challenge!
Cisco 350-401 Valid Braindumps Ebook - We will never neglect any user.
Our company is open-handed to offer benefits at intervals, with 350-401 Valid Braindumps Ebook learning questions priced with reasonable prices. Almost all kinds of working staffs can afford our price, even the students. And we will give some discounts from time to time. Although our 350-401 Valid Braindumps Ebook practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the 350-401 Valid Braindumps Ebook exam.
If you decide to buy a 350-401 Valid Braindumps Ebook exam braindumps, you definitely want to use it right away! 350-401 Valid Braindumps Ebook training guide’s powerful network and 24-hour online staff can meet your needs.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
VMware 5V0-31.23 - They are unsuspecting experts who you can count on. With the difficulties and inconveniences existing for many groups of people like white-collar worker, getting a SAP C_ARCON_2404 certification may be draining. So WGU Integrated-Physical-Sciences exam dumps are definitely valuable acquisitions. In any case, many people have passed the exam after using Microsoft MB-280 training materials. SAP C_ARSCC_2404 - And we are the leading practice materials in this dynamic market.
Updated: May 28, 2022