Every version of 350-401 Exam Sims study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere; the online version can use on any electronic equipment there is network available; the software version can simulate the real 350-401 Exam Sims exam environment to let you have more real feeling to 350-401 Exam Sims real exam, besides the software version can be available installed on unlimited number devices. We highly recommend going through the 350-401 Exam Sims answers multiple times so you can assess your preparation for the 350-401 Exam Sims exam. Make sure that you are preparing yourself for the 350-401 Exam Sims test with our practice test software as it will help you get a clear idea of the real 350-401 Exam Sims exam scenario. You will get the most valid and best useful 350-401 Exam Sims study material with a reasonable price.
CCNP Enterprise 350-401 But we have successfully done that.
If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Sims exam, then you must have 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Sims question torrent. When you are eager to pass the 350-401 Reliable Exam Simulator Fee real exam and need the most professional and high quality practice material, we are willing to offer help. Our 350-401 Reliable Exam Simulator Fee training prep has been on the top of the industry over 10 years with passing rate up to 98 to 100 percent.
Our 350-401 Exam Sims study materials are easy to be mastered and boost varied functions. We compile Our 350-401 Exam Sims preparation questions elaborately and provide the wonderful service to you thus you can get a good learning and preparation for the 350-401 Exam Sims exam. After you know the characteristics and functions of our 350-401 Exam Sims training materials in detail, you will definitely love our exam dumps and enjoy the wonderful study experience.
Our Cisco 350-401 Exam Sims exam questions are often in short supply.
At this time, you will stand out in the interview among other candidates with the 350-401 Exam Sims certification. Constant improvement is significant to your career development. Your current achievements cannot represent your future success. Never stop advancing. Come to study our 350-401 Exam Sims learning materials. Stick to the end, victory is at hand. Action always speaks louder than words. With the help of our 350-401 Exam Sims study questions, you can reach your dream in the least time.
If you are satisfied with our 350-401 Exam Sims training guide, come to choose and purchase. If you buy the Software or the APP online version of our 350-401 Exam Sims study materials, you will find that the timer can aid you control the time.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Now, you are fortunate enough to come across our IIA IIA-CIA-Part2 exam guide. All experts and professors of our company have been trying their best to persist in innovate and developing the APMG-International AgileBA-Foundation test training materials all the time in order to provide the best products for all people and keep competitive in the global market. Cisco 200-301-KR - It is known to us that time is money, and all people hope that they can spend less time on the pass. Amazon SAA-C03 - We cannot predicate what will happen in the future. It is believed that no one is willing to buy defective products, so, the IBM C1000-156 study guide has established a strict quality control system.
Updated: May 28, 2022