Because the new technology enjoys a distinct advantage, that is convenient and comprehensive. In order to follow this trend, our company product such a 350-401 Study Questions Book exam questions that can bring you the combination of traditional and novel ways of studying. The passing rate of our study material is up to 99%. And you can free download the demos of the 350-401 Study Questions Book practice engine to have a experience before payment. During the operation of the 350-401 Study Questions Book study materials on your computers, the running systems of the 350-401 Study Questions Book study guide will be flexible, which saves you a lot of troubles and help you concentrate on study. And our 350-401 Study Questions Bookstudy materials have three formats which help you to read, test and study anytime, anywhere.
CCNP Enterprise 350-401 After all, no one can steal your knowledge.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Questions Book exam dumps will lead you to success! We believe that the trial version will help you a lot. If you are not certain whether the 350-401 Latest Test Experience prep guide from our company is suitable for you or not, so you are hesitate to buy and use our study materials.
Many people may have different ways and focus of study to pass 350-401 Study Questions Book exam in the different time intervals, but we will find that in real life, can take quite a long time to learn 350-401 Study Questions Book learning questions to be extremely difficult. You may be taken up with all kind of affairs, and sometimes you have to put down something and deal with the other matters for the latter is more urgent and need to be done immediately. With the help of our 350-401 Study Questions Book training guide, your dream won’t be delayed anymore.
Our Cisco 350-401 Study Questions Book exam torrent carries no viruses.
If you are not sure whether our 350-401 Study Questions Book exam braindumps are suitable for you, you can request to use our trial version. Of course, 350-401 Study Questions Book learning materials produced several versions of the product to meet the requirements of different users. You can also ask to try more than one version and choose the one that suits you best. And we have three different versions Of our 350-401 Study Questions Book study guide: the PDF, the Software and the APP online.
As long as you study our 350-401 Study Questions Book training engine and followe it step by step, we believe you will achieve your dream easily. Every question from our 350-401 Study Questions Book study materials is carefully elaborated and the content of our 350-401 Study Questions Book exam questions involves the professional qualification certificate examination.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
WGU Cybersecurity-Architecture-and-Engineering training materials are not only the domestic market, but also the international high-end market. So if you get any questions of our EMC D-PWF-DS-23 learning guide, please get us informed. And you can free download the demos of the CompTIA SY0-601 study guide to check it out. Passing the Adobe AD0-E716 exam has never been so efficient or easy when getting help from our Adobe AD0-E716 training materials. Databricks Databricks-Certified-Data-Engineer-Professional - All in all, helping our candidates to pass the exam successfully is what we always looking for.
Updated: May 28, 2022