In today's society, the number of college students has grown rapidly. Everyone has their own characteristics. How do you stand out? Obtaining 350-401 Dumps Materials certification is a very good choice. A little attention to prepare 350-401 Dumps Materials practice test will improve your skills to clear exam with high passing score. For most busy IT workers, 350-401 Dumps Materials dumps pdf is the best alternative to your time and money to secure the way of success in the IT filed. Let me tell the advandages of using the 350-401 Dumps Materials practice engine.
CCNP Enterprise 350-401 And your life will become better and better.
With 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Materials training prep, you only need to spend 20 to 30 hours of practice before you take the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps Materials exam. We have faith in our professional team and our Valid 350-401 Study Guide study tool, and we also wish you trust us wholeheartedly. Our Valid 350-401 Study Guide test torrent keep a look out for new ways to help you approach challenges and succeed in passing the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam.
Cisco Certification exams are essential to move ahead, because being certified professional a well-off career would be in your hand. Cisco is among one of the strong certification provider, who provides massively rewarding pathways with a plenty of work opportunities to you and around the world. But the mystery is quite challenging to pass 350-401 Dumps Materials exam unless you have an updated exam material.
Cisco 350-401 Dumps Materials - So just come and have a try!
We think of providing the best services of 350-401 Dumps Materials exam questions as our obligation. So we have patient after-sales staff offering help 24/7 and solve your problems all the way. Those considerate services are thoughtful for your purchase experience and as long as you need us, we will solve your problems. Our staff is suffer-able to your any questions related to our 350-401 Dumps Materials test guide. If you get any suspicions, we offer help 24/7 with enthusiasm and patience. Apart from our stupendous 350-401 Dumps Materials latest dumps, our after-sales services are also unquestionable. Your decision of the practice materials may affects the results you concerning most right now. Good exam results are not accidents, but the results of careful preparation and high quality and accuracy materials like our 350-401 Dumps Materials practice materials.
We offer money back guarantee if anyone fails but that doesn’t happen if one use our 350-401 Dumps Materials dumps. These Cisco 350-401 Dumps Materials exam dumps are authentic and help you in achieving success.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
IIA IIA-CIA-Part2-KR - Good practice materials like our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question can educate exam candidates with the most knowledge. For all content of our Huawei H19-412_V1.0 learning materials are strictly written and tested by our customers as well as the market. We believe you will also competent enough to cope with demanding and professorial work with competence with the help of our GARP 2016-FRR exam braindumps. Once you buy the product you can use the convenient method to learn the EMC D-VXR-OE-23 exam torrent at any time and place. You can find the latest version of Google ChromeOS-Administrator practice guide in our website and you can practice Google ChromeOS-Administrator study materials in advance correctly and assuredly.
Updated: May 28, 2022