Who will refuse such a wonderful dream? So you must struggle for a better future. Life is a long journey. It is never too late to learn new things. Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam prep has taken up a large part of market. with decided quality to judge from customers' perspective, If you choose the right 350-401 Study Guide Book practice braindumps, it will be a wise decision. Our 350-401 Study Guide Book study materials must appear at the top of your list.
Our 350-401 Study Guide Book exam materials can help you realize it.
What are you still hesitating for? Hurry to buy our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Study Guide Book learning engine now! Our 350-401 Latest Dumps Book guide materials are high quality and high accuracy rate products. It is all about the superior concreteness and precision of the 350-401 Latest Dumps Book exam questions that helps.
If you are worry about the coming 350-401 Study Guide Book exam, our 350-401 Study Guide Book study materials will help you solve your problem. In order to promise the high quality of our 350-401 Study Guide Book exam questions, our company has outstanding technical staff, and has perfect service system after sale. More importantly, our good 350-401 Study Guide Book guide quiz and perfect after sale service are approbated by our local and international customers.
Cisco 350-401 Study Guide Book - It's never too late to know it from now on.
Cisco 350-401 Study Guide Book exam materials of Omgzlook is devoloped in accordance with the latest syllabus. At the same time, we also constantly upgrade our training materials. So our exam training materials is simulated with the practical exam. So that the pass rate of Omgzlook is very high. It is an undeniable fact. Through this we can know that Omgzlook Cisco 350-401 Study Guide Book exam training materials can brought help to the candidates. And our price is absolutely reasonable and suitable for each of the candidates who participating in the IT certification exams.
And this version also helps establish the confidence of the candidates when they attend the 350-401 Study Guide Book exam after practicing. Because of the different habits and personal devices, requirements for the version of our 350-401 Study Guide Book exam questions vary from person to person.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
ISTQB CTAL-TTA - In recent years, many people are interested in Cisco certification exam. Our Veeam VMCE_v12 study materials boost superior advantages and the service of our products is perfect. Indeed, Cisco SAP E-ACTAI-2403 test is very difficult exam, but this is not suggested that you cannot get high marks and pass your exam with ease. No matter in the day or on the night, you can consult us the relevant information about our Huawei H23-221_V1.0 preparation exam through the way of chatting online or sending emails. Why we give a promise that once you fail the exam with our dump, we guarantee a 100% full refund of the dump cost to you, as all those who have pass the exam successfully with our VMware 2V0-41.23 exam dumps give us more confidence to make the promise of "No help, full refund".
Updated: May 28, 2022