It doesn’t matter if it's your first time to attend 350-401 Ppt practice test or if you are freshman in the IT certification test, our latest 350-401 Ppt dumps guide will boost you confidence to face the challenge. Our dumps collection will save you much time and ensure you get high mark in 350-401 Ppt actual test with less effort. Come and check the free demo in our website you won’t regret it. Omgzlook Cisco 350-401 Ppt exam questions and answers provide you test preparation information with everything you need. About Cisco 350-401 Ppt exam, you can find these questions from different web sites or books, but the key is logical and connected. We guarantee full refund for any reason in case of your failure of 350-401 Ppt test.
CCNP Enterprise 350-401 100% guarantee to pass IT certification test.
The efficiency and accuracy of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Ppt learning guide will not let you down. If you don't want to waste a lot of time and efforts on the exam, you had better select Omgzlook Cisco 350-401 Valid Exam Collection File dumps. Using this certification training dumps can let you improve the efficiency of your studying so that it can help you save much more time.
Omgzlook 350-401 Ppt exam preparation begins and ends with your accomplishing this credential goal. Although you will take each 350-401 Ppt online test one at a time - each one builds upon the previous. Remember that each 350-401 Ppt exam preparation is built from a common certification foundation.350-401 Ppt prepareation will provide the most excellent and simple method to pass your 350-401 Ppt Certification Exams on the first attempt.
Actually, Cisco 350-401 Ppt exam really make you anxious.
After our unremitting efforts, 350-401 Ppt learning guide comes in everybody's expectation. Our professional experts not only have simplified the content and grasp the key points for our customers, but also recompiled the 350-401 Ppt preparation materials into simple language so that all of our customers can understand easily no matter which countries they are from. In such a way, you will get a leisure study experience as well as a doomed success on your coming 350-401 Ppt exam.
Every version of 350-401 Ppt study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere; the online version can use on any electronic equipment there is network available; the software version can simulate the real 350-401 Ppt exam environment to let you have more real feeling to 350-401 Ppt real exam, besides the software version can be available installed on unlimited number devices.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
By passing the exams multiple times on practice test software, you will be able to pass the real Salesforce Platform-App-Builder test in the first attempt. APM APM-PFQ - The 99% pass rate can ensure you get high scores in the actual test. They handpicked what the Amazon SAA-C03-KR training guide usually tested in exam recent years and devoted their knowledge accumulated into these Amazon SAA-C03-KR actual tests. Immediately download for the IBM C1000-181 study pdf is available for study with no time wasted. If you are suspicious of our SAP C_BW4H_2404 exam questions, you can download the free demo from our official websites.
Updated: May 28, 2022