If you try on it, you will find that the operation systems of the 350-401 Reliable Exam Test exam questions we design have strong compatibility. So the running totally has no problem. And you can free download the demos of the 350-401 Reliable Exam Test practice engine to have a experience before payment. This means with our products you can prepare for 350-401 Reliable Exam Test exam efficiently. Our research and development team not only study what questions will come up in the 350-401 Reliable Exam Test exam, but also design powerful study tools like exam simulation software.The content of our 350-401 Reliable Exam Test practice materials is chosen so carefully that all the questions for the exam are contained. If you decide to buy the 350-401 Reliable Exam Test reference materials from our company, we will have special people to advise and support you.
CCNP Enterprise 350-401 After all, no one can steal your knowledge.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Reliable Exam Test exam dumps will lead you to success! We believe that the trial version provided by our company will help you know about our study materials well and make the good choice for yourself. More importantly, the trial version of the 350-401 Valid Test Vce Free exam questions from our company is free for all people.
Many people may have different ways and focus of study to pass 350-401 Reliable Exam Test exam in the different time intervals, but we will find that in real life, can take quite a long time to learn 350-401 Reliable Exam Test learning questions to be extremely difficult. You may be taken up with all kind of affairs, and sometimes you have to put down something and deal with the other matters for the latter is more urgent and need to be done immediately. With the help of our 350-401 Reliable Exam Test training guide, your dream won’t be delayed anymore.
Cisco 350-401 Reliable Exam Test - Our website is a very safe and regular platform.
If you have been very panic sitting in the examination room, our 350-401 Reliable Exam Test actual exam allows you to pass the exam more calmly and calmly. After you use our products, our 350-401 Reliable Exam Test study materials will provide you with a real test environment before the 350-401 Reliable Exam Test exam. After the simulation, you will have a clearer understanding of the exam environment, examination process, and exam outline. And our 350-401 Reliable Exam Test learning guide will be your best choice.
On one hand, our 350-401 Reliable Exam Test test material owns the best quality. When it comes to the study materials selling in the market, qualities are patchy.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
CheckPoint 156-215.81.20 - They are the versions: PDF, Software and APP online. Linux Foundation HFCP - We treat your time as our own time, as precious as you see, so we never waste a minute or two in some useless process. Of course, CompTIA 220-1101 learning materials produced several versions of the product to meet the requirements of different users. Every question from our Symantec 250-587 study materials is carefully elaborated and the content of our Symantec 250-587 exam questions involves the professional qualification certificate examination. Study our Salesforce PDX-101 training materials to write "test data" is the most suitable for your choice, after recent years show that the effect of our Salesforce PDX-101 guide dump has become a secret weapon of the examinee through qualification examination, a lot of the users of our Salesforce PDX-101 guide dump can get unexpected results in the examination.
Updated: May 28, 2022