350-401 Best Vce - Cisco Valid Study Guide Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Pdf - Omgzlook

Please believe that our Omgzlook team have the same will that we are eager to help you pass 350-401 Best Vce exam. Maybe you are still worrying about how to prepare for the exam, but now we will help you gain confidence. By by constantly improving our dumps, our strong technical team can finally take proud to tell you that our 350-401 Best Vce exam materials will give you unexpected surprises. You can free download them to check if it is the exact one that you want. Actually we eliminate the barriers blocking you from our 350-401 Best Vce practice materials. You have tried all kinds of exam questions when others are still looking around for 350-401 Best Vce exam materials, which means you have stayed one step ahead of other IT exam candidates.

CCNP Enterprise 350-401 Some of them can score more than 90%.

Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Best Vce practice materials integrating scientific research of materials, production of high quality 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Best Vce training engine and considerate after-sales services have help us won a prominent position in the field of materials. Good 350-401 Exam Simulator Free study guide will be a shortcut for you to well-directed prepare and practice efficiently, you will avoid do much useless efforts and do something interesting. Omgzlook releases 100% pass-rate 350-401 Exam Simulator Free study guide files which guarantee candidates 100% pass exam in the first attempt.

All exam materials in 350-401 Best Vce learning materials contain PDF, APP, and PC formats. They have the same questions and answers but with different using methods. If you like to take notes randomly according to your own habits while studying, we recommend that you use the PDF format of our 350-401 Best Vce study guide.

Cisco 350-401 Best Vce - God will help those who help themselves.

350-401 Best Vce real dumps revised and updated according to the syllabus changes and all the latest developments in theory and practice, our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) real dumps are highly relevant to what you actually need to get through the certifications tests. Moreover they impart you information in the format of 350-401 Best Vce questions and answers that is actually the format of your real certification test. Hence not only you get the required knowledge but also find the opportunity to practice real exam scenario.

And a brighter future is waiting for you. So don't waste time and come to buy our 350-401 Best Vce study braindumps.

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html

QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").

QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.

QUESTION NO: 4
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

Discount is being provided to the customer for the entire Cisco Splunk SPLK-2003 preparation suite. It is also known to us that passing the exam is not an easy thing for many people, so a good study method is very important for a lot of people, in addition, a suitable study tool is equally important, because the good and suitable ARDMS SPI reference guide can help people pass the exam in a relaxed state. I believe that after you try EMC D-VXR-OE-23 training engine, you will love them. Microsoft MB-210 - Of course, if you choose our study materials, you will have the chance to experience our PDF version. Additionally, the Microsoft AZ-140 exam takers can benefit themselves by using our testing engine and get numerous real Microsoft AZ-140 exam like practice questions and answers.

Updated: May 28, 2022