No one can know the 350-401 Online Training Materials study materials more than them. In such a way, they offer the perfect 350-401 Online Training Materials exam materials not only on the content but also on the displays. Why we are so popular in the market and trusted by tens of thousands of our clients all over the world? The answer lies in the fact that every worker of our company is dedicated to perfecting our 350-401 Online Training Materials exam guide. If you still cannot make decisions, you can try our free demo of the 350-401 Online Training Materials training quiz. The money you have invested on updating yourself is worthwhile. Our experts offer help by diligently working on the content of 350-401 Online Training Materials learning questions more and more accurate.
CCNP Enterprise 350-401 (PDF, APP, software).
If you are anxious about how to get 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Online Training Materials certification, considering purchasing our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Online Training Materials study tool is a wise choice and you will not feel regretted. Up to now, there are three versions of Exam 350-401 Cram exam materials for your choice. So high-quality contents and flexible choices of Exam 350-401 Cram learning mode will bring about the excellent learning experience for you.
It is certain that the pass rate of our 350-401 Online Training Materials study guide among our customers is the most essential criteria to check out whether our 350-401 Online Training Materials training materials are effective or not. The good news is that according to statistics, under the help of our 350-401 Online Training Materials learning dumps, the pass rate among our customers has reached as high as 98% to 100%. It is strongly proved that we are professonal in this career and our 350-401 Online Training Materials exam braindumps are very popular.
Cisco 350-401 Online Training Materials - Nowadays, it is hard to find a desirable job.
As is known to us, the leading status of the knowledge-based economy has been established progressively. It is more and more important for us to keep pace with the changeable world and improve ourselves for the beautiful life. So the 350-401 Online Training Materials certification has also become more and more important for all people. Because a lot of people long to improve themselves and get the decent job. In this circumstance, more and more people will ponder the question how to get the 350-401 Online Training Materials certification successfully in a short time.
Luckily, we are going to tell you a good new that the demo of the 350-401 Online Training Materials study materials are easily available in our company. If you buy the study materials from our company, we are glad to offer you with the best demo of our study materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
SAP C_SIGDA_2403 - Why not have a try? SAP C_WZADM_2404 - We can promise that you will never miss the important information about the exam. With our HP HPE0-V27-KR exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. Our Splunk SPLK-3003 study guide design three different versions for all customers. According to these ignorant beginners, the Snowflake SnowPro-Core exam questions set up a series of basic course, by easy to read, with corresponding examples to explain at the same time, the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question let the user to be able to find in real life and corresponds to the actual use of learned knowledge, deepened the understanding of the users and memory.
Updated: May 28, 2022