350-401 New Dumps Book & 350-401 Valid Exam Experience - Cisco 350-401 Reliable Exam Discount Voucher - Omgzlook

On the one hand, by the free trial services you can get close contact with our products, learn about the detailed information of our 350-401 New Dumps Book study materials, and know how to choose the different versions before you buy our products. On the other hand, using free trial downloading before purchasing, I can promise that you will have a good command of the function of our 350-401 New Dumps Book exam prepare. According to free trial downloading, you will know which version is more suitable for you in advance and have a better user experience. our company is determined to help provide the most accurate 350-401 New Dumps Book exam questions and help more people get the 350-401 New Dumps Book certificate successfully. Our company has a long history of 10 years in designing 350-401 New Dumps Book study materials and enjoys a good reputation across the globe. Adhere to new and highly qualified 350-401 New Dumps Book quiz guide to meet the needs of customer, we are also committed to providing the first -class after-sale service.

CCNP Enterprise 350-401 It is very easy and convenient to use and find.

As the employment situation becoming more and more rigorous, it’s necessary for people to acquire more 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Dumps Book skills and knowledge when they are looking for a job. Being dedicated to these practice materials painstakingly and pooling useful points into our Reliable 350-401 Exam Simulations exam materials with perfect arrangement and scientific compilation of messages, our Reliable 350-401 Exam Simulations practice materials can propel the exam candidates to practice with efficiency. Our experts are constantly looking for creative way to immortalize our Reliable 350-401 Exam Simulations actual exam in this line.

There is an old saying goes, good memory is inferior to sodden ability to write, so we believe that it is a highly productive way for you to memory the knowledge point and review the reference books more effectively. Besides our 350-401 New Dumps Book exam torrent support free demo download, as we mentioned before, it is an ideal way for you to be fully aware of our 350-401 New Dumps Book prep guide and then purchasing them if suitable and satisfactory. There is no doubt that among our three different versions of 350-401 New Dumps Book guide torrent, the most prevalent one is PDF version, and this is particularly suitable and welcomed by youngsters.

Cisco 350-401 New Dumps Book - Life is full of ups and downs.

Although a lot of products are cheap, but the quality is poor, perhaps users have the same concern for our latest 350-401 New Dumps Book exam dump. Here, we solemnly promise to users that our product error rate is zero. Everything that appears in our products has been inspected by experts. In our 350-401 New Dumps Book practice materials, users will not even find a small error, such as spelling errors or grammatical errors. It is believed that no one is willing to buy defective products, so, the 350-401 New Dumps Book study guide has established a strict quality control system. The entire compilation and review process for latest 350-401 New Dumps Book exam dump has its own set of normative systems, and the 350-401 New Dumps Book practice materials have a professional proofreader to check all content. Only through our careful inspection, the study material can be uploaded to our platform. So, please believe us, 0 error rate is our commitment.

Our payment system will automatically delete your payment information once you finish paying money for our 350-401 New Dumps Book exam questions. Our company has built the culture of integrity from our establishment.

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

In general, users can only wait about 5-10 minutes to receive our SAP C-S4CFI-2402 learning material, and if there are any problems with the reception, users may contact our staff at any time. Therefore, the effect of the user using the latest Huawei H28-153_V1.0 exam dump is the only standard for proving the effectiveness and usefulness of our products. Our trial version of our Huawei H31-311_V2.5 study materials can be a good solution to this problem. CompTIA CV0-003 - This may be the best chance to climb the top of your life. SAP C-TS422-2023 - We can confidently say that our products are leading in the products of the same industry.

Updated: May 28, 2022