350-401 Latest Mock Test & Cisco Exam 350-401 Materials - Implementing Cisco Enterprise Network Core Technologies 350-401 Encor - Omgzlook

The strength of our the IT elite team will make you feel incredible. You can try to free download part of the exam questions and answers about Cisco certification 350-401 Latest Mock Test exam to measure the reliability of our Omgzlook. Our Omgzlook is a professional website to provide accurate exam material for a variety of IT certification exams. Our online version of 350-401 Latest Mock Test learning guide does not restrict the use of the device. You can use the computer or you can use the mobile phone. Some of them who have passed the Cisco certification 350-401 Latest Mock Test exam also use Omgzlook's products.

CCNP Enterprise 350-401 Omgzlook guarantee 100% success.

But you don't have to worry about this when buying our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Mock Test actual exam. If you find any quality problems of our Test 350-401 Lab Questions or you do not pass the exam, we will unconditionally full refund. Omgzlook is professional site that providing Cisco Test 350-401 Lab Questions questions and answers , it covers almost the Test 350-401 Lab Questions full knowledge points.

Our free demos of our 350-401 Latest Mock Test learning questions will help you know our study materials comprehensively. As we have three different kinds of the 350-401 Latest Mock Test practice braindumps, accordingly we have three kinds of the free demos as well. They are a small part of the questions and answers of the 350-401 Latest Mock Test learning quiz.

Cisco 350-401 Latest Mock Test - Never say you can not do it.

If we redouble our efforts, our dreams will change into reality. Although we might come across many difficulties during pursuing our dreams, we should never give up. If you still have dreams, our 350-401 Latest Mock Test study materials will help you realize your dreams. Where is a will, there is a way. And our 350-401 Latest Mock Test exam questions are the exact way which can help you pass the exam and get the certification with ease. Just have a try on our 350-401 Latest Mock Test practice guide, then you will know you can succeed.

In addition, the exam qualification can prove that you have high skills. However, like all the exams, Cisco 350-401 Latest Mock Test test is also very difficult.

350-401 PDF DEMO:

QUESTION NO: 1
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 4
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

Here our Pegasystems PEGACPLSA88V1 study materials are tailor-designed for you. SAP C_TS462_2022-KR - What do you know about Omgzlook? Have you ever used Omgzlook exam dumps or heard Omgzlook dumps from the people around you? As professional exam material providers in IT certification exam, Omgzlook is certain the best website you've seen. SAP C-WZADM-2404 - Omgzlook has a huge IT industry elite team. SAP C_SIGDA_2403 - Cisco certification exam is one of the important exams. Cisco certification EMC D-MSS-DS-23 exam is an exam concerned by lots of IT professionals.

Updated: May 28, 2022