Our passing rate may be the most attractive factor for you. Our 350-401 Exam Sample learning guide have a 99% pass rate. This shows what? As long as you use our products, you can pass the exam! I hope we have enough sincerity to impress you. And our pass rate of the 350-401 Exam Sample training engine is high as 98% to 100%, it is the data that proved and tested by our loyal customers. If you are not working hard, you will lose a lot of opportunities!
CCNP Enterprise 350-401 If you don't believe, you can give it a try.
350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Sample exam prep sincerely hopes that you can achieve your goals and realize your dreams. The one who choose our study materials that consider our website as the top preparation material seller for Pass4Sure 350-401 Study Materials study materials, and inevitable to carry all candidates the finest knowledge on exam syllabus contents. Not only that, we will provide you a free update service within one year from the date of purchase, in order to keep up the changes in the exam so that every candidates who purchase our{ ExamCode} study materials can pass the exam one time.
The existence of our 350-401 Exam Sample learning guide is regarded as in favor of your efficiency of passing the exam. Our 350-401 Exam Sample exam questions are supposed to help you pass the exam smoothly. Don't worry about channels to the best 350-401 Exam Sample study materials so many exam candidates admire our generosity of offering help for them.
Cisco 350-401 Exam Sample - Now IT industry is more and more competitive.
350-401 Exam Sample study materials can expedite your review process, inculcate your knowledge of the exam and last but not the least, speed up your pace of review dramatically. The finicky points can be solved effectively by using our 350-401 Exam Sample exam questions. With a high pass rate as 98% to 100% in this career, we have been the leader in this market and helped tens of thousands of our loyal customers pass the exams successfully. Just come to buy our 350-401 Exam Sample learning guide and you will love it.
If you have decided to upgrade yourself by passing Cisco certification 350-401 Exam Sample exam, then choosing Omgzlook is not wrong. Our Omgzlook promise you that you can pass your first time to participate in the Cisco certification 350-401 Exam Sample exam and get Cisco 350-401 Exam Sample certification to enhance and change yourself.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Splunk SPLK-2003 - So accordingly, we offer three versions of free demos for you to download. They continue to use their IT knowledge and rich experience to study the previous years exams of Cisco SAP C-ABAPD-2309 and have developed practice questions and answers about Cisco SAP C-ABAPD-2309 exam certification exam. You can feel assertive about your exam with our 100 guaranteed professional Network Appliance NS0-014 practice engine for you can see the comments on the websites, our high-quality of our Network Appliance NS0-014 learning materials are proved to be the most effective exam tool among the candidates. If you choose to sign up to participate in Cisco certification Palo Alto Networks PCNSA exams, you should choose a good learning material or training course to prepare for the examination right now. And our Salesforce MuleSoft-Integration-Architect-I test guide benefit exam candidates by improving their ability of coping the exam in two ways, first one is their basic knowledge of it.
Updated: May 28, 2022