Omgzlook 350-401 Intereactive Testing Engine exam preparation begins and ends with your accomplishing this credential goal. Although you will take each 350-401 Intereactive Testing Engine online test one at a time - each one builds upon the previous. Remember that each 350-401 Intereactive Testing Engine exam preparation is built from a common certification foundation.350-401 Intereactive Testing Engine prepareation will provide the most excellent and simple method to pass your 350-401 Intereactive Testing Engine Certification Exams on the first attempt. Omgzlook won a good reputation by these candidates that have passed Cisco 350-401 Intereactive Testing Engine certification exam. Omgzlook gets approve from the people with its powerful exam dumps. The 350-401 Intereactive Testing Engine preparation products available here are provided in line with latest changes and updates in 350-401 Intereactive Testing Engine syllabus.
CCNP Enterprise 350-401 The first one is downloading efficiency.
With our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Intereactive Testing Engine study materials, all of your study can be completed on your computers because we have developed a kind of software which includes all the knowledge of the exam. We understand your drive of the certificate, so you have a focus already and that is a good start. The sources and content of our 350-401 Reliable Exam Questions practice dumps are all based on the real 350-401 Reliable Exam Questions exam.
All 350-401 Intereactive Testing Engine online tests begin somewhere, and that is what the 350-401 Intereactive Testing Engine training course will do for you: create a foundation to build on. Study guides are essentially a detailed 350-401 Intereactive Testing Engine tutorial and are great introductions to new 350-401 Intereactive Testing Engine training courses as you advance. The content is always relevant, and compound again to make you pass your 350-401 Intereactive Testing Engine exams on the first attempt.
Our Cisco 350-401 Intereactive Testing Engine practice materials are really reliable.
Do you often envy the colleagues around you can successfully move to a larger company to achieve the value of life? Are you often wondering why your classmate, who has scores similar to yours, can receive a large company offer after graduation and you are rejected? In fact, what you lack is not hard work nor luck, but 350-401 Intereactive Testing Engine guide question. If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through 350-401 Intereactive Testing Engine exam, then you must have 350-401 Intereactive Testing Engine question torrent.
When you are eager to pass the 350-401 Intereactive Testing Engine real exam and need the most professional and high quality practice material, we are willing to offer help. Our 350-401 Intereactive Testing Engine training prep has been on the top of the industry over 10 years with passing rate up to 98 to 100 percent.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our Microsoft AI-102 study materials are easy to be mastered and boost varied functions. Our materials can make you master the best CompTIA 220-1101 questions torrent in the shortest time and save your much time and energy to complete other thing. We are glad to help you get the certification with our best SAP C_IEE2E_2404 study materials successfully. No matter you are exam candidates of high caliber or newbies, our APMG-International AgileBA-Foundation exam quiz will be your propulsion to gain the best results with least time and reasonable money. On the other hand, using free trial downloading before purchasing, I can promise that you will have a good command of the function of our Adobe AD0-E207 exam prepare.
Updated: May 28, 2022