350-401 New Testcollection & 350-401 Real Question On The Exam - Cisco 350-401 Exam Dumps.Zip - Omgzlook

Our 350-401 New Testcollection real questions are high efficient which can help you pass the exam during a week. We just contain all-important points of knowledge into our 350-401 New Testcollection latest material. And we keep ameliorate our 350-401 New Testcollection latest material according to requirements of 350-401 New Testcollection exam. Please pay more attention to our website. Omgzlook help you to find real Cisco 350-401 New Testcollection exam preparation process in a real environment. As a responsible company over ten years, we are trustworthy.

CCNP Enterprise 350-401 So that you can achieve a multiplier effect.

Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) New Testcollection guide question dumps are suitable for all age groups. And you can pass the exam successfully. Education degree does not equal strength, and it does not mean ability.

With the help of 350-401 New Testcollection guide questions, you can conduct targeted review on the topics which to be tested before the exam, and then you no longer have to worry about the problems that you may encounter a question that you are not familiar with during the exam. With 350-401 New Testcollection learning materials, you will not need to purchase any other review materials. Please be assured that with the help of 350-401 New Testcollection learning materials, you will be able to successfully pass the exam.

Cisco 350-401 New Testcollection - 100% guarantee to pass IT certification test.

The disparity between our 350-401 New Testcollection practice materials and others are distinct. We strive for perfection all these years and get satisfactory results with concerted cooperation between experts, and all questions points in our 350-401 New Testcollection real exam are devised and written base on the real exam. Do not let other 350-401 New Testcollection study dumps mess up your performance or aggravate learning difficulties. The efficiency and accuracy of our 350-401 New Testcollection learning guide will not let you down.

If you don't want to waste a lot of time and efforts on the exam, you had better select Omgzlook Cisco 350-401 New Testcollection dumps. Using this certification training dumps can let you improve the efficiency of your studying so that it can help you save much more time.

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

Remember that each Microsoft DP-300-KR exam preparation is built from a common certification foundation.Microsoft DP-300-KR prepareation will provide the most excellent and simple method to pass your Microsoft DP-300-KR Certification Exams on the first attempt. As long as you choose our dumps as review tool before the exam, you will have a happy result in SAP C_BW4H_2404 exam, which is perfectly obvious. The ARDMS SPI preparation products available here are provided in line with latest changes and updates in ARDMS SPI syllabus. Actually, Microsoft DP-300 exam really make you anxious. After our unremitting efforts, HP HPE0-V27-KR learning guide comes in everybody's expectation.

Updated: May 28, 2022