We regard the customer as king so we put a high emphasis on the trust of every users, therefore our security system can protect you both in payment of 350-401 Flexible Testing Engine guide braindumps and promise that your computer will not be infected during the process of payment on our 350-401 Flexible Testing Engine study materials. Moreover, if you end up the cooperation between us,we have the responsibility to delete your personal information on 350-401 Flexible Testing Engine exam prep. In a word, Wwe have data protection act for you to avoid information leakage! Of course, when you are seeking for exam materials, it is certain that you will find many different materials. However, through investigation or personal experience, you will find Omgzlook questions and answers are the best ones for your need. During the trial period of our 350-401 Flexible Testing Engine study materials, the PDF versions of the sample questions are available for free download, and both the pc version and the online version can be illustrated clearly.
CCNP Enterprise 350-401 At first, it can be only used on PC.
Different from other similar education platforms, the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Flexible Testing Engine quiz guide will allocate materials for multi-plate distribution, rather than random accumulation without classification. Our Upgrade 350-401 Dumps free dumps demo will provide you some basic information for the accuracy of our exam materials. All questions and answers in our Upgrade 350-401 Dumps real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing valid Upgrade 350-401 Dumps exam pdf.
We will send our 350-401 Flexible Testing Engine exam guide within 10 minutes after your payment. You can check your mailbox ten minutes after payment to see if our 350-401 Flexible Testing Engine exam guide are in. What we attach importance to in the transaction of latest 350-401 Flexible Testing Engine quiz prep is for your consideration about high quality and efficient products and time-saving service.
Cisco 350-401 Flexible Testing Engine - You’ve heard it right.
Having been handling in this line for more than ten years, we can assure you that our 350-401 Flexible Testing Engine study questions are of best quality and reasonable prices for your information. We offer free demos of the latest version covering all details of our 350-401 Flexible Testing Engine exam braindumps available at present as representatives. So 350-401 Flexible Testing Engine practice materials come within the scope of our business activities. Choose our 350-401 Flexible Testing Engine learning guide, you won't regret!
Besides, the pollster conducted surveys of public opinions of our 350-401 Flexible Testing Engine study engine and get desirable outcomes that more than 98 percent of exam candidates feel rewarding after using our 350-401 Flexible Testing Engine actual exam. And we enjoy their warm feedbacks to show and prove that we really did a good job in this career.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Microsoft MB-910 study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. The latest Snowflake ARA-R01 quiz torrent can directly lead you to the success of your career. Our considerate service is not only reflected in the purchase process, but also reflected in the considerate after-sales assistance on our Cisco 200-201 exam questions. The PDF version of our IIBA ECBA test braindumps provide demo for customers; you will have the right to download the demo for free if you choose to use the PDF version. IBM C1000-101-KR - Professional ability is very important both for the students and for the in-service staff because it proves their practical ability in the area they major in.
Updated: May 28, 2022