Our 350-401 Free practice guide well received by the general public for immediately after you have made a purchase for our 350-401 Free exam prep, you can download our 350-401 Free study materials to make preparations for the exams. It is universally acknowledged that time is a key factor in terms of the success of exams. The more time you spend in the preparation for 350-401 Free learning engine, the higher possibility you will pass the exam. When you are faced with the real exam, you can pass Cisco 350-401 Free test easily. Omgzlook exam dumps have two version-PDF and SOFT version which will give you convenient. In the past few years, 350-401 Free question torrent has received the trust of a large number of students and also helped a large number of students passed the exam smoothly.
CCNP Enterprise 350-401 There are no better dumps at the moment.
CCNP Enterprise 350-401 Free - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) As far as concerned, the online mode for mobile phone clients has the same function. Are you still searching proper 350-401 Reliable Test Forum exam study materials, or are you annoying of collecting these study materials? As the professional IT exam dumps provider, Omgzlook has offered the complete 350-401 Reliable Test Forum exam materials for you. So you can save your time to have a full preparation of 350-401 Reliable Test Forum exam.
As a matter of fact, since the establishment, we have won wonderful feedback and ceaseless business, continuously working on developing our 350-401 Free test prep. We have been specializing 350-401 Free exam dumps many years and have a great deal of long-term old clients, and we would like to be a reliable cooperator on your learning path and in your further development. While you are learning with our 350-401 Free quiz guide, we hope to help you make out what obstacles you have actually encountered during your approach for 350-401 Free exam torrent through our PDF version, only in this way can we help you win the 350-401 Free certification in your first attempt.
You final purpose is to get the Cisco 350-401 Free certificate.
For a long time, high quality is our 350-401 Free exam questions constantly attract students to participate in the use of important factors, only the guarantee of high quality, to provide students with a better teaching method, and at the same time the 350-401 Free practice quiz brings more outstanding teaching effect. Our high-quality 350-401 Free} learning guide help the students know how to choose suitable for their own learning method, our 350-401 Free study materials are a very good option.
More importantly, it is evident to all that the 350-401 Free training materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market. If you want to pass the 350-401 Free exam and get the related certification in the shortest time, choosing the 350-401 Free training materials from our company will be in the best interests of all people.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
All the preparation material reflects latest updates in SAP C-C4H320-34 certification exam pattern. AAPC CPC - As is known to us, where there is a will, there is a way. HP HPE0-V27-KR - This innovative facility provides you a number of practice questions and answers and highlights the weak points in your learning. IBM C1000-168 - Life is a long journey. ACAMS CAMS-KR - Our behavior has been strictly ethical and responsible to you, which is trust worthy.
Updated: May 28, 2022