More about 350-401 Exam Cram Questions Exams Dumps: If you want to know more about our test preparations materials, you should explore the related 350-401 Exam Cram Questions exam Page. You may go over our 350-401 Exam Cram Questions brain dumps product formats and choose the one that suits you best. You can also avail of the free demo so that you will have an idea how convenient and effective our 350-401 Exam Cram Questions exam dumps are for 350-401 Exam Cram Questions certification. It is known to us that preparing for the exam carefully and getting the related certification are very important for all people to achieve their dreams in the near future. It is a generally accepted fact that the 350-401 Exam Cram Questions exam has attracted more and more attention and become widely acceptable in the past years. Besides, our experts will concern about changes happened in 350-401 Exam Cram Questions study prep all the time.
CCNP Enterprise 350-401 Just come and buy it!
So our services around the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Cram Questions training materials are perfect considering the needs of exam candidates all-out. We believe if you compare our 350-401 Latest Practice Questions training guide with the others, you will choose ours at once. Our 350-401 Latest Practice Questions study materials have a professional attitude at the very beginning of its creation.
As we know, our products can be recognized as the most helpful and the greatest 350-401 Exam Cram Questions study engine across the globe. Even though you are happy to hear this good news, you may think our price is higher than others. We can guarantee that we will keep the most appropriate price because we want to expand our reputation of 350-401 Exam Cram Questions preparation dumps in this line and create a global brand.
Cisco 350-401 Exam Cram Questions - Service is first!
In order to save a lot of unnecessary trouble to users, we have completed our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions research and development of online learning platform, users do not need to download and install, only need your digital devices have a browser, can be done online operation of the 350-401 Exam Cram Questions test guide. This kind of learning method is very convenient for the user, especially in the time of our fast pace to get Cisco certification. In addition, our test data is completely free of user's computer memory, will only consume a small amount of running memory when the user is using our product. At the same time, as long as the user ensures that the network is stable when using our 350-401 Exam Cram Questions training materials, all the operations of the learning material of can be applied perfectly.
With our great efforts, our 350-401 Exam Cram Questionspractice dumps have been narrowed down and targeted to the 350-401 Exam Cram Questions examination. We can ensure you a pass rate as high as 99%!
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
Quickly purchase APMG-International Better-Business-Cases-Practitioner study guide and go to the top of your life! The client can decide which Cisco 300-510 version to choose according their hobbies and their practical conditions. HP HPE0-V27-KR - So our customers can pass the exam with ease. Our APP online version of Microsoft AZ-104 exam questions has the advantage of supporting all electronic equipment. Microsoft MB-220 - Our PDF version can be printed and you can take notes as you like.
Updated: May 28, 2022