The accomplished 350-401 Exam Cram Materials guide exam is available in the different countries around the world and being testified over the customers around the different countries. They are valuable acquisitions to the filed. How can our 350-401 Exam Cram Materials practice materials become salable products? Their quality with low prices is unquestionable. There is no doubt that the function can help you pass the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam. Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam questions provide with the software which has a variety of self-study and self-assessment functions to detect learning results. Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) test torrent boost 99% passing rate and high hit rate so you can have a high probability to pass the exam.
CCNP Enterprise 350-401 And we have become a popular brand in this field.
CCNP Enterprise 350-401 Exam Cram Materials - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) And the content of them is the same though the displays are different. For many people, it’s no panic passing the Reliable 350-401 Test Vce exam in a short time. Luckily enough，as a professional company in the field of Reliable 350-401 Test Vce practice questions ,our products will revolutionize the issue.
We guarantee that you can pass the exam at one time even within one week based on practicing our 350-401 Exam Cram Materials exam materials regularly. 98 to 100 percent of former exam candidates have achieved their success by the help of our 350-401 Exam Cram Materials practice questions. And we have been treated as the best friend as our 350-401 Exam Cram Materials training guide can really help and change the condition which our loyal customers are in and give them a better future.
Our Cisco 350-401 Exam Cram Materials actual test guide can give you some help.
Before you decide to buy Omgzlook of Cisco 350-401 Exam Cram Materials exam questions, you will have a free part of the questions and answers as a trial. So that you will know the quality of the Omgzlook of Cisco 350-401 Exam Cram Materials exam training materials. The Cisco 350-401 Exam Cram Materials exam of Omgzlook is the best choice for you.
350-401 Exam Cram Materials study materials are here waiting for you! With a higher status, your circle of friends will expand.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
ACAMS CAMS-KR - And the materials we have are very cheap. HP HPE7-A02 - Anyway, after your payment, you can enjoy the one-year free update service with our guarantee. Juniper JN0-223 - So the choice is important. Besides, the price of our HP HPE0-V25 learning guide is very favourable even the students can afford it. With it, you will be pass the Cisco CWNP CWNA-109 exam certification which is considered difficult by a lot of people.
Updated: May 28, 2022