The first step is to select the 350-401 Official Practice Test test guide, choose your favorite version, the contents of different version are the same, but different in their ways of using. The second step: fill in with your email and make sure it is correct, because we send our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool to you through the email. Later, if there is an update, our system will automatically send you the latest Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) version. The hit rate of the dumps is very high, which guarantees you can pass your exam with ease at the first attempt. Omgzlook Cisco 350-401 Official Practice Test practice test dumps can determine accurately the scope of the examination compared with other exam materials, which can help you improve efficiency of study and help you well prepare for 350-401 Official Practice Test exam. If you really want to get the certificate successfully, only 350-401 Official Practice Test guide materials with intrinsic contents can offer help they are preeminent materials can satisfy your both needs of studying or passing with efficiency.
You cannot blindly prepare for 350-401 Official Practice Test exam.
And it is quite easy to free download the demos of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Official Practice Test training guide, you can just click on the demos and input your email than you can download them in a second. New 350-401 Mock Exam answers real questions can help candidates have correct directions and prevent useless effort. If you still lack of confidence in preparing your exam, choosing a good New 350-401 Mock Exam answers real questions will be a wise decision for you, it is also an economical method which is saving time, money and energy.
With 350-401 Official Practice Test exam questions, your teacher is no longer one person, but a large team of experts who can help you solve all the problems you have encountered in the learning process. 350-401 Official Practice Test study material has a high quality service team. First of all, the authors of study materials are experts in the field.
Cisco 350-401 Official Practice Test - Then you can learn and practice it.
Like the real exam, Omgzlook Cisco 350-401 Official Practice Test exam dumps not only contain all questions that may appear in the actual exam, also the SOFT version of the dumps comprehensively simulates the real exam. With Omgzlook real questions and answers, when you take the exam, you can handle it with ease and get high marks.
As the quick development of the world economy and intense competition in the international, the world labor market presents many new trends: company’s demand for the excellent people is growing. As is known to us, the 350-401 Official Practice Test certification is one mainly mark of the excellent.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
Our Cisco 100-490 exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our Cisco 100-490 exam software, you can improve your study ability to obtain Cisco 100-490 exam certification. Our Huawei H28-155_V1.0 training materials are compiled carefully with correct understanding of academic knowledge using the fewest words to express the most clear ideas, rather than unnecessary words expressions or sentences and try to avoid out-of-date words. After confirmation, we will immediately refund all the money that you purchased the UiPath UiPath-ABAv1 exam materials. More importantly, we provide all people with the trial demo for free before you buy our SAP C_HAMOD_2404 exam torrent and it means that you have the chance to download from our web page for free; you do not need to spend any money. Salesforce JavaScript-Developer-I - Sometimes a small step is possible to be a big step in life.
Updated: May 28, 2022