This may be the best chance to climb the top of your life. Our 350-401 Certification Test Questions prepare questions are suitable for people of any culture level, whether you are the most basic position, or candidates who have taken many exams, is a great opportunity for everyone to fight back. According to different audience groups, our products for the examination of the teaching content of a careful division, so that every user can find a suitable degree of learning materials. Someone around you must be using our 350-401 Certification Test Questions exam questions. The users of our 350-401 Certification Test Questions exam materials are really very extensive. If you are not confident in your choice, you can seek the help of online services.
CCNP Enterprise 350-401 What is more, we offer customer services 24/7.
If you want to be one of them, please allow me to recommend the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Certification Test Questions learning questions from our company to you, the superb quality of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Certification Test Questions exam braindumps we've developed for has successfully helped thousands of candidates to realize their dreams. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study questions provide free trial service for consumers. If you are interested in Latest 350-401 Dumps Free Download exam material, you only need to enter our official website, and you can immediately download and experience our trial PDF file for free.
The only aim of our company is to help each customer pass their exam as well as getting the important certification in a short time. If you want to pass your exam and get the 350-401 Certification Test Questions certification which is crucial for you successfully, I highly recommend that you should choose the 350-401 Certification Test Questions study materials from our company so that you can get a good understanding of the exam that you are going to prepare for. We believe that if you decide to buy the 350-401 Certification Test Questions study materials from our company, you will pass your exam and get the certification in a more relaxed way than other people.
Cisco 350-401 Certification Test Questions - Selecting Omgzlook means choosing a success
350-401 Certification Test Questions exam dumps allow free trial downloads. You can get the information you want to know through the trial version. After downloading our study materials trial version, you can also easily select the version you like, as well as your favorite 350-401 Certification Test Questions exam prep, based on which you can make targeted choices. Our study materials want every user to understand the product and be able to really get what they need.
You can free download part of Omgzlook's practice questions and answers about Cisco certification 350-401 Certification Test Questions exam online, as an attempt to test our quality. As long as you choose to purchase Omgzlook's products, we will do our best to help you pass Cisco certification 350-401 Certification Test Questions exam disposably.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
As we all know, Dell D-AX-DY-A-00 certificates are an essential part of one’s resume, which can make your resume more prominent than others, making it easier for you to get the job you want. Omgzlook's training product for Cisco certification SAP C-TS410-2022 exam includes simulation test and the current examination. And our Microsoft PL-300-KR leanring guide can help you get all of the keypoints and information that you need to make sure that you will pass the exam. Dell D-SRM-A-01 - Omgzlook guarantee 100% success. But you don't have to worry about this when buying our HP HP2-I72 actual exam.
Updated: May 28, 2022